Business Community > Controllers > Connect TL-SX3008F to a 16 port Netgear 716 via SGP
< Controllers

Connect TL-SX3008F to a 16 port Netgear 716 via SGP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connect TL-SX3008F to a 16 port Netgear 716 via SGP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connect TL-SX3008F to a 16 port Netgear 716 via SGP
Connect TL-SX3008F to a 16 port Netgear 716 via SGP
2022-04-06 06:38:41
Model: TL-SX3008F  
Hardware Version:
Firmware Version:

Hi,

 

I am looking at the TL-SX3008F 10G SFP+ switch and looking at the documentation I haven't been able to determine whether I can connect the TL-SX3008F 10G SFP+ switch to a 1G Netgear GS716Tv3 via it's SFP Port. 

 

If it is achievable what would be required to be achieve it. I'm assuming

1. 1G SFP Transceiver Module plugged into TL-SX3008F

2. 1G SFP Transceiver Module plugged into GS716Tv3

3. Multimode fibre connecting the two SFP Transceiver Modules

 

Or is this incorrect - I want to ensure this is achievable so I can ensure devices plugged into the TL-SX3008F and GS716Tv3 can communicate with each other.

 

Any assistance would be appreciated.


Thanks

 

Richard 

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:Connect TL-SX3008F to a 16 port Netgear 716 via SGP
2022-04-07 05:33:12 - last edited 2022-04-07 05:34:02

  @rsraszka 

Hi. Similarly, SFP+ is backward compatible. Since this is a SFP+ switch, you need to make sure the module is compatible with the switch and all is good.

By default, the SX3008F can auto negotiate with the SFP module you used, if that is not correctly negotiate to 1Gbps, please log in to the switch and manually set the port to 1Gbps. By default, the port is on Auto(-negotiate)

About the choice of your fiber cable, pick up the cable first or the module first. Either way, you need to buy the necessary accessories relying on the specs of the module/fiber.

 

FYI:

Troubleshooting Instruction of SFP/Media Converter

The Q&A about the compatibility of the TP-Link SFP modules with the third party devices

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#2
Options
Re:Connect TL-SX3008F to a 16 port Netgear 716 via SGP
2022-04-07 09:35:37 - last edited 2022-04-07 09:37:13

  @Hank21 

Thanks Hank21,

 

So to be clear I'll need a 

1. SFP Module  to plug into SX3008F

2. SFP Module to plug into 716T

3. Multi-mode fibre to connect the two switches.

 

The SX3008F should then auto-negotiate to use 1Gbps and all is connected.

 

Richard

 

 

  0  
  0  
#3
Options
Re:Connect TL-SX3008F to a 16 port Netgear 716 via SGP
2022-04-07 12:13:21

  @rsraszka

rsraszka wrote

  @Hank21 

Thanks Hank21,

 

So to be clear I'll need a 

1. SFP Module  to plug into SX3008F

2. SFP Module to plug into 716T

3. Multi-mode fibre to connect the two switches.

 

The SX3008F should then auto-negotiate to use 1Gbps and all is connected.

 

Richard

 

 

That's what I mean. In this post, you said it's multi-mode fiber, so, pick up the multi-mode modules and plug them in. And connect. All looking good. smiley

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 403

Replies: 3

Related Articles
TL-SX3008F Invalid port number.
285 0
TL-SX3008F SND Capabilities
493 0
TL-SX3008F Trunk Ports
1413 0
No link-light on TL-SX3008F
647 0
TL-SX3008F 2.5GB support
930 0
TL-SX3008F 2.5 Gb port speed
1058 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.