StephenJD wrote

I have setup the DHCP settings on Settings>Wired Networks>LAN>Action>Edit

It save OK, but when I set my laptop to Use DHCP server, it says it cannot find a DHCP server.

Does the OC200 have a DHCP server in it? If so, what have I done wrong?

  @StephenJD 

The OC200 does NOT have an inbuilt DHCP server, it purely administers DHCP service provided by a TP-Link DHCP equipped gateway router such as ER 605 or ER7206.

  @GaelForce 

I just discovered this too.

Difficult to find an AP without DHCP, but here it is missing???

Most illogical is the default LAN, it must have an interface and DHCP, but this must be a fake setting.

Warnings and config should be more clear about this.

This part puzzled me most in my lab setup.

Roelofz wrote

  @GaelForce 

 

I just discovered this too.

 

Difficult to find an AP without DHCP, but here it is missing???

 

Most illogical is the default LAN, it must have an interface and DHCP, but this must be a fake setting.

Warnings and config should be more clear about this.

 

This part puzzled me most in my lab setup.

  @Roelofz Please read my response here :

https://community.tp-link.com/en/business/forum/topic/552726

This might help