Business Community > Omada Cloud SDN > Should I use 443 or 8043?
< Omada Cloud SDN

Should I use 443 or 8043?

Should I use 443 or 8043?
Should I use 443 or 8043?
2022-05-25 12:26:58 - last edited 2022-05-26 09:08:16

In the OC200 controller GUI, there is an Access Config section that has Hostname/IP, HTTPS Port For Controller and other things.  I was just looking at some things on the TP Link site, and found a page that shows the setup.  In the HTTPS Port for controller, TP Link is using 8043. Is it better to use 8043 than 443 for this port?  It might be a silly question, but I want everything to be right.  Thanks.

0
0
#1
Options
1 Accepted Solution
Re:Should I use 443 or 8043?-Solution
2022-05-25 18:28:01 - last edited 2022-05-26 09:08:16

  @ingeborgdot 

This might answer your question. 
 

https://community.tp-link.com/en/business/kb/detail/362

Recommended Solution
3
3
#2
Options
2 Reply
Re:Should I use 443 or 8043?-Solution
2022-05-25 18:28:01 - last edited 2022-05-26 09:08:16

  @ingeborgdot 

This might answer your question. 
 

https://community.tp-link.com/en/business/kb/detail/362

Recommended Solution
3
3
#2
Options
Re:Should I use 443 or 8043?
2022-05-25 21:42:08

  @JFND Okay, I see.  For the hardware controller it shows 443, and for the software controller it shows 8043. Thanks.

0
0
#3
Options
Related Articles
What ip should I use?
548 0
Omada software controller 4.1.5 - Port 80 and port 443 are already in use
1396 0
Upgrade from 3.1.x/3.2.x - Do you have to upgrade to 4.1.5 or can you use a newer version?
25 0
How do you configure Lets Encrypt for port 8043 and auto renew?
222 0
WLAN or SSID Schedule
143 0
Option to set HTTPS port on the controller no longer supports port 443
248 2
About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.