Omada OpenVPN and client IP address reservation
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I use Omada Software Controller, version 5.3.1. I have set up OpenVPN server to connect to and it works fine. But because it is not currently possible to set IP pool only for one IP address I would like to be able to set IP reservation for connected clients, but it doesn't seem currently possible. Is there any way how to achieve this?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I also tried, if you set up OpenVPN, the subnet mask can only choose 16-29, I think it may be because the establishment of VPN channels, both ends need to have one to several virtual IP, so the address pool is not limited to 32, it seems that the design mechanism is so, I also built a topology to do experiments, the result of the test is that at least three virtual IPs need to be used.
Of course, if you use L2TP or PPTP should not have similar problems, it can be limited to 32.
- Copy Link
- Report Inappropriate Content
In my opinion, it can not be set, because the address reservation function is for DHCP, but the VPN client is from the VPN IP pool to get IP, the mechanism is not the same.
- Copy Link
- Report Inappropriate Content
I understand this, but is there any reason why you can't set IP pool to only one IP address to be sure you get always the same IP? I only connect one client using VPN and I would like to be able to set firewall/other rules based on it's IP it gets when it connects via OpenVPN.
- Copy Link
- Report Inappropriate Content
I also tried, if you set up OpenVPN, the subnet mask can only choose 16-29, I think it may be because the establishment of VPN channels, both ends need to have one to several virtual IP, so the address pool is not limited to 32, it seems that the design mechanism is so, I also built a topology to do experiments, the result of the test is that at least three virtual IPs need to be used.
Of course, if you use L2TP or PPTP should not have similar problems, it can be limited to 32.
- Copy Link
- Report Inappropriate Content
It seems from officila OpenVPN website, that OpenVPN server itself support static client IP, so it's just TP-link / Omada doesn't support it. I hope this feature will be added soon I like OpenVPN more than other solutions, but fact Omada is missing static client IP/IP reservation is a shame.
- Copy Link
- Report Inappropriate Content
Any chance to get IP reservation for OpenVPN?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1329
Replies: 5
Voters 0
No one has voted for it yet.