the device interrupts on the LAN side

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

the device interrupts on the LAN side

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
the device interrupts on the LAN side
the device interrupts on the LAN side
2022-06-06 06:14:27
Model: CPE210  
Hardware Version: V3
Firmware Version: 2.2.3 2020 1110 Rel 60634

hi

 

this is now the second device that sporadically interrupts the communication on the LAN side

 

The device is recognized on the WLAN-side
all LED's show normally
LAN LED flashes
the 24VDC power supply is constantly available

 

if the LAN-side connection is lost, the device cannot be addressed - (no response to a PING request)

 

this is now for the third time in about 30 days
Interrupting the LAN_connection helped twice
the third time the device only started after a longer time (> 30 minutes)

 

we have various devices in use, including a data line with 2 CPE210 (p2p), which work without problems

1 CPE220 (AP); 1 EAP110 (AP); 1WSB210 Client; 2 CPE210 (AP + Client p2p)

 

alongside,
Nothing can be seen in the LOG, the two lines are there:

 

  1

2022-06-06 07:36:53

OTHER 

INFO 

System started

  2

2022-06-06 07:37:06

OTHER 

WARNING

LAN IP and mask changed to 192.168.1.252 255.255.255.0

 

thanks for your advice

  0      
  0      
#1
Options
5 Reply
Re:the device interrupts on the LAN side
2022-06-07 08:24:03

  @MaxTR 

 

The dropout problems are all very similar and it is suggested that looking at these similar threads may help you:

https://community.tp-link.com/en/business/forum/topic/522716

https://community.tp-link.com/en/business/forum/topic/542018

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:the device interrupts on the LAN side
2022-06-07 09:43:02
thank you, I have see this entry's but the Ethernet-Cable is tested and ok the signal is ok (WLAN is no problem 08-3A-F2-51-8D-58 Barolo_4 -78/-60,-101/-101 10 65.0 0/0 0.00 192.168.1.69 1 days 05:03:44 own cannel and 20Mhz bandwith
  0  
  0  
#3
Options
Re:the device interrupts on the LAN side
2022-06-11 08:34:19

  @MaxTR 

 

few minutes ago the CPE210 interrupts the connection on the LAN side ( WLAN is enable! )

 

after a half hour the connection cam again... in the Device-Log no info's about

 

it is very bad/unacceptable not understandable

 

this is the second device with this problem!!!

MaxTR wrote

thank you, I have see this entry's but the Ethernet-Cable is tested and ok the signal is ok (WLAN is no problem 08-3A-F2-51-8D-58 Barolo_4 -78/-60,-101/-101 10 65.0 0/0 0.00 192.168.1.69 1 days 05:03:44 own cannel and 20Mhz bandwith

 

  0  
  0  
#4
Options
Re:the device interrupts on the LAN side
2022-06-11 09:30:24 - last edited 2022-06-11 09:31:02

this is all from the "System Log": ########################################################################### # CPE210 System Log # Time = 2022-06-11 12:28:41 449514s # H-Ver = CPE210 v3.20 : S-Ver = 2.2.3 Build 20201110 Rel. 60634 (0000) # L = 192.168.1.252 : M = 255.255.255.0 # W1 = DHCP : W = 0.0.0.0 : M = 0.0.0.0 : G = 0.0.0.0 ########################################################################### 2022-06-06 07:36:53 OTHER INFO System started 2022-06-06 07:37:06 OTHER WARNING LAN IP and mask changed to 192.168.1.252 255.255.255.0

 

 

 

and now, what else... ???

  0  
  0  
#5
Options
Re:the device interrupts on the LAN side
2022-06-11 10:54:22
... no related Articles will describe my problem!!! unfortunally :(
  0  
  0  
#6
Options