ER605 V2 Lose connection of dynamic ip
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
The ER605 lose connection to a wan when ISP change ip. I need to disconnect the wan and reconnect it to get access to the internet again in that wan. Also, I can not modify the time interval for it in standalone mode , what is the default time interval ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The default time interval is 2 minutes if memory serves.
The time interval can be changed on the Controller.
- Copy Link
- Report Inappropriate Content
@Virgo yeah it detect it offline ,but never tries to reconnect I need to press connect manually as when my modem loses connection the ip changed! why its not automatic ?or its a bug
- Copy Link
- Report Inappropriate Content
@tl12 I have same problem. Need reconnect manually
- Copy Link
- Report Inappropriate Content
@tl12 Have you tried the latest firmware?
- Copy Link
- Report Inappropriate Content
Thanks for the heads up, downloaded, will install.
however, I will not be able to test, since I rather not risk going back...
I've changed the Verizon Home Internet router from pass through (aka just a cellular modem) back to "router" functionality, so that it provides a static IP to ER605, and the Verizon Home Internet acting as a router is able to acquire a new IP number each time Verizon changes it.
the only minor negative is one extra network hop, i.e. from ER605 at 10.0.0.1 to Verizon Home Internet router at 192.168.0.1 to the Verizon dynamic IP on the WAN side of the Verizon Home Internet router.
my other ISP (on WAN1) was nice enough to give me a static IP for free!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 915
Replies: 5
Voters 0
No one has voted for it yet.