er7206 openvpn standalone
Good morning,
 i updated the firmware and today i need to configure openvpn (without controller).
 Many devices no longer implement l2tp.
 i have configured openvpn but i have a problem.
 when connecting I see only the Lan subnet 192.168.20.xxx and all the other subnets are not reachable. i can't send all traffic on the vpn.
 I have made several attempts but cannot find a solution.
 I insert image of my network.
Thanks in advance for your reply

- Copy Link
 - Subscribe
 - Bookmark
 - Report Inappropriate Content
 
there is only support for one LAN in stand alone, connect the router to a controller and you can select several VLANs

- Copy Link
 - Report Inappropriate Content
 
Thanks for the quick response.
The controller seems like a good solution.
I have only one question: is it possible to have all traffic on the vpn (full vpn)?
When i use l2tp it works perfectly
- Copy Link
 - Report Inappropriate Content
 
No, OpenVPN on Omada use splitt tunnnel and route only trafic to your LAN and VLAN, everything els bypass VPN.
- Copy Link
 - Report Inappropriate Content
 
- Copy Link
 - Report Inappropriate Content
 
I think they are working on improving OpenVPN, I am using open vpn on a rapspbery Pi4 for now, it is also much much faster than TP-Link's routers. so it's a cheap and easy option, you can also use any old PC and install ubuntu and OpenVPN on it so there are possibilities :-)
- Copy Link
 - Report Inappropriate Content
 
Good idea. I saw the product you use, very interesting. Thanks for all
- Copy Link
 - Report Inappropriate Content
 
Most rasperypi have no fan, so very silent.
I have cabinet with fan but no nois from this anyway.
I use OKdo Raspberry Pi 4 4GB Model B Starter Kit and this work grate,
you can run Omada controller and OpenVPN on same hardware and off cause mutch more if you want to.
- Copy Link
 - Report Inappropriate Content
 
- Copy Link
 - Report Inappropriate Content
 
Information
Helpful: 1
Views: 2957
Replies: 8
