ER605 Standalone is MAC filtering possible
ER605 Standalone is MAC filtering possible
Hi Everyone,
My Questions is
---> In ER605 (standalone mode) how to Whitelist MAC of approved PCs and block the connection coming for other MAC from connecting to my network (Wired and Wireless).
Here is the config.
2 ISP (WAN1, WAN2)
2 Routers 1) Main router : ER605 v2 Firmware 2.0.1 Build 20220223 (standalone)
2) Access Point : Archer A9 v6.0 Firmware 1.1.1)
note : Omada Controller Not available. So ER605 is in Standalone mode.
Connections
ISPs > ER605 > Archer A9
ISPs
ISP1 > ER605 WAN
ISP2 > ER605 WAN / LAN1
ER605 and Archer A9 (Router Mode) is connected through LAN to LAN (ER605 LAN3 > Archer A9 LAN1).
Dhcp server in ER605 is Enabled and Dhcp server in Archer A9 is disabled.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@GRL No no, im not using a controller, just using the omada web interface. But only 1 device er605
- Copy Link
- Report Inappropriate Content
thats the cloud web interface, which acts as cloud contorller. The standalone GUI is quite different
- Copy Link
- Report Inappropriate Content
@GRL wow, tks. I reseted the router and now i can see the mac filtering under firewall settings... I guess the firmware upgrade plus resetting it did the trick. I wont be using the omada web interface anymore, since - as you mentioned - it acts like a cloud controller... Thank you
- Copy Link
- Report Inappropriate Content
@Shailesh_M The solution that GRL presented, did it worked for you?
- Copy Link
- Report Inappropriate Content
@GRL
Thank for the solution.
Is there an issue in with this beta version that i need to know ?
i will test it and reply back.
- Copy Link
- Report Inappropriate Content
i also Tested it and it is working fine.
@GRL Thanks a lot. It is blocking connetions from MAC ids that are not listed.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4295
Replies: 16
Voters 0
No one has voted for it yet.