TL-SG105PE - No HTTPS protocol available to login.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

TL-SG105PE - No HTTPS protocol available to login.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12 Reply
Re:TL-SG105PE - No HTTPS protocol available to login.
2022-09-30 20:02:19

  @Philbert 

Yes, I was looking at this Tl-SG2210MP because the other model has only 61W over 8 POE port, but it cost about 190 euros....

https://www.tp-link.com/it/compare/?type=smb&typeId=5748&productIds=43626%2C41002

 

I will think about it.

We are here to learn from our mistakes. Lesson learned! wink

 

Thanks again.

Regards.

Daniele

  0  
  0  
#12
Options
Re:TL-SG105PE - No HTTPS protocol available to login.
2022-09-30 20:57:02

  @jdaniele 

 

No worries.. if you need anything else just ask and will try and get back to you as soon as free

 

In terms of Wattage for POE..  60w is a reasonable amount, most APs only pull around 5-7watts on average, cameras around the same.   For example my own switch has 3x APs (EAP245s), 1x controller (OC200) and 2x Ring Camera running off it at present and its totalling around 33watts.  

  1  
  1  
#13
Options
Related Articles