Hi,thanks for your reply. I implemented the settings as shown and thought the matter had been resolved but i have since descovered that the gateway continues to indicate a WAN as online even when it has lost internet connectivity. I changed the echo server to a url instead of an IP address to see if it makes any change and nothing changed. I then downloaded the running logs and configuration before manually disconnecting the offline WAN.

Kindly Assist

Hank21 wrote

Dear @Farai_M ,

 

Farai_M wrote

I am looking for a way to set the WAN online detection to DNS only with my gateway in controller mode if possible. I really need the gateway to be able to detect when a WAN is offline even though the ethernet cable remains connected.

 

The current controller can customize the ping/DNS in the Echo Server settings so that when the IP address is entered manually, Online Detection pings this address by default.
When a domain name is entered manually, Online Dection will resolve the domain name and ping the resolved IP address.

 

You can go to Omada Gateway's Detailed page-----Config----Advanced, please refer to the following image:

 

Best Regards!

  @Farai_M @Hank21 Can someone please assist