EAP115 is not working with POE only with wall wart

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP115 is not working with POE only with wall wart

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP115 is not working with POE only with wall wart
EAP115 is not working with POE only with wall wart
2022-10-21 23:24:15
Model: EAP115  
Hardware Version: V4
Firmware Version: 5.0.5

I have a several EAP 115s on my Omada Network.  I'm using TL-POE2412G PoE injectors and they are not powering the APs.  When I use the PoE on the Switch TL-SG2008P v3.0 they work fine.  When I use the wall warts that come with them they work fine.  What am I doing wrong?  I have used multiple TL-POE2412G and EAP 115 and still have the same results. 

  0      
  0      
#1
Options
2 Reply
Re:EAP115 is not working with POE only with wall wart
2022-10-22 00:51:27

  @PlanetGecko 

 

The EAP115 requires 44-57V on POE.  IT looks like the TL-POE2412G PoE injectors only supply 24v and that's why it isn't working.  See spec sheet here:

 

https://static.tp-link.com/2020/202003/20200318/TL-POE2412G&4824G%20Datasheet.pdf

  0  
  0  
#2
Options
Re:EAP115 is not working with POE only with wall wart
2022-10-24 06:29:40

  @PlanetGecko 

 

EAP115 requires IEEE802.3af PoE, you will need to use TL-POE150S

  0  
  0  
#3
Options