Manage switch over tagged vlan

Manage switch over tagged vlan

Manage switch over tagged vlan
Manage switch over tagged vlan
2022-11-16 20:26:02 - last edited 2022-11-17 12:15:01
Model: TL-SG3428X  
Hardware Version: V1
Firmware Version: TL-SG3428X(UN)_V1_20210128

Hello,
 

This is our first TP-Link switch in production so we do not have a lot of experiences with them. But since We have around 25 of switches I thought I could handle it. Most of our switches are UBNT and HP, and we use dedicated vlan to manage switches. That vlan is tagged only on up/down links between switches. UBNTs are managed over controller. On HPs we change IP address and set corresponding management vlan id.

 

By TL-SG3428x I added our management vlan and then in layer 3/interface, I also added new Interface and set IP address and checked admin mode. I also setup static routing. But what ever I do thet interfaces status is down and I can not access the switch.

 

How do you manage to do this?

 

Thanks and kind regards,

Marko

  0      
  0      
#1
Options
1 Accepted Solution
Re:Manage switch over tagged vlan-Solution
2022-11-17 08:42:16 - last edited 2022-11-17 12:15:01

  @MarkoP 

 

It is working now. Just rebooted the switch.

 

Regards.

 

Recommended Solution
  2  
  2  
#2
Options
1 Reply
Re:Manage switch over tagged vlan-Solution
2022-11-17 08:42:16 - last edited 2022-11-17 12:15:01

  @MarkoP 

 

It is working now. Just rebooted the switch.

 

Regards.

 

Recommended Solution
  2  
  2  
#2
Options

Information

Helpful: 0

Views: 111

Replies: 1

Related Articles