EAP225-Outdoor(EU) AC 1200 v3.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

EAP225-Outdoor(EU) AC 1200 v3.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP225-Outdoor(EU) AC 1200 v3.0
EAP225-Outdoor(EU) AC 1200 v3.0
2022-11-19 08:54:57 - last edited 2022-11-19 10:16:28
Model: EAP225-Outdoor  
Hardware Version: V3
Firmware Version: 5.0.8
Hello,


EAP225 V3 Firmwareversion: 5.0.8 Build 20220613 Rel. 51936

Controller OC200: 5.6.4

successfully integrated an EAP225-Outdoor(EU) v3.0 into my OmadaSystem. However, I noticed that it only connects to the POE_Switch (TL-SG2210MP v1.0) with 100Mbit? See image. According to the description he can but 1000Mbit. It is connected with a Cat 7 cable to the switch with a length of approx. 15m. Is my EAP225 Outdoor defective? or .....

Sorry for my English. Thanks to Google translator :-)

 

Bi Torsten

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:EAP225-Outdoor(EU) AC 1200 v3.0-Solution
2022-11-19 09:56:54 - last edited 2022-11-19 10:16:28

  @Torsten23 

 

Goto switch in Omada controller select port and then edit and select profile override

 

 

Recommended Solution
  3  
  3  
#9
Options
13 Reply
Re:EAP225-Outdoor(EU) AC 1200 v3.0
2022-11-19 09:19:09

  @Torsten23 

 

it sounds like a cable fault, try connecting the EAP to the switch with a shorter cable to test, if it's ok it should show 1000 MBps

Use a standard rj45 patch cable to test .

  0  
  0  
#2
Options
Re:EAP225-Outdoor(EU) AC 1200 v3.0
2022-11-19 09:23:32

  @shberge 

 

Have already tested the cable with a cable tester, everything ok. 1-8 incl. ground. Furthermore, I connected my laptop to this connection or cable and there I have the 1000Mbit. So the Cat7 cable should be fine.
  0  
  0  
#3
Options
Re:EAP225-Outdoor(EU) AC 1200 v3.0
2022-11-19 09:32:36

  @Torsten23 

Ok, so if you are 100% sure that the cable is ok then there is probably something wrong with your device, so I would replace it with another one.

You can also try to force to 1000Mbps on the switch port to see what happens, either it switches to 1000Mbps or you lose the connection to EAP.

 

  0  
  0  
#4
Options
Re:EAP225-Outdoor(EU) AC 1200 v3.0
2022-11-19 09:40:54

  @shberge 

 

So I just tested it again with another Cat 5e cable, but with exactly the same result! How can I force the port on the switch to 1000Mbit???
  0  
  0  
#5
Options
Re:EAP225-Outdoor(EU) AC 1200 v3.0
2022-11-19 09:47:15

  @Torsten23 

If you only get 100Mbps on a new cable, it seems that there is a fault with the EAP,
But try locking the port to 1000Mbps

go to switch, ports, select the port you want to change  pres edit, select Profile Overrides. then you wil see this.

 

 

  2  
  2  
#6
Options
Re:EAP225-Outdoor(EU) AC 1200 v3.0
2022-11-19 09:53:15

  @shberge 

 

Sorry I can't find this function as in the picture? Where can you see that again?
  0  
  0  
#7
Options
Re:EAP225-Outdoor(EU) AC 1200 v3.0
2022-11-19 09:54:24

  @Torsten23 

 

okay habs

  0  
  0  
#8
Options
Re:EAP225-Outdoor(EU) AC 1200 v3.0-Solution
2022-11-19 09:56:54 - last edited 2022-11-19 10:16:28

  @Torsten23 

 

Goto switch in Omada controller select port and then edit and select profile override

 

 

Recommended Solution
  3  
  3  
#9
Options
Re:EAP225-Outdoor(EU) AC 1200 v3.0
2022-11-19 10:00:30

  @shberge 

 

Ok, found it and will test it ;-)
  0  
  0  
#10
Options
Re:EAP225-Outdoor(EU) AC 1200 v3.0
2022-11-19 10:15:11

  @shberge 

 

Great now it worked. And 1000 Mbit are displayed. see image.
One more question, the changeover to 1000Mbit on the switch then probably applies to all ports, right?

 

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 984

Replies: 13

Related Articles