EAP225-Outdoor(EU) AC 1200 v3.0
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.EAP225-Outdoor(EU) AC 1200 v3.0
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello, EAP225 V3 Firmwareversion: 5.0.8 Build 20220613 Rel. 51936 Controller OC200: 5.6.4 successfully integrated an EAP225-Outdoor(EU) v3.0 into my OmadaSystem. However, I noticed that it only connects to the POE_Switch (TL-SG2210MP v1.0) with 100Mbit? See image. According to the description he can but 1000Mbit. It is connected with a Cat 7 cable to the switch with a length of approx. 15m. Is my EAP225 Outdoor defective? or ..... Sorry for my English. Thanks to Google translator :-)
Bi Torsten
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
but it seems that there is something wrong since you have to lock the port to 1000Mbps, I have never had to do this on any access point. but ok
No, it's only the port you changed that is locked to 1000Mbps, the others should still be set to auto.
- Copy Link
- Report Inappropriate Content
but it seems that there is something wrong since you have to lock the port to 1000Mbps, I have never had to do this on any access point. but ok
No, it's only the port you changed that is locked to 1000Mbps, the others should still be set to auto
- Copy Link
- Report Inappropriate Content
@Torsten23 I know you found a work around but since it did not auto negotiate that signifies that something is not right. There is another uses that has the same EAP225 V3 that was negoiating at 100mbps. He could not find or did not have a way to manually set the speed and exchanged. Its possible there is something wrong with the version of the EAP.
EAP225 V3 negotiating at only 100mbps on 1000mbps port
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1452
Replies: 13
Voters 0
No one has voted for it yet.