Mutiple networks and dhcp

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Mutiple networks and dhcp

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Mutiple networks and dhcp
Mutiple networks and dhcp
2022-12-25 09:42:14 - last edited 2022-12-28 18:56:58

Hello All

 

Decided to replace my google nest with Omada series devices to be able to segregate networks.

 

My setup so far:

 

internet (fiber) --> (sfp connection) router/vpn ER7206--> wired connection to WiFi AP01 EAP245 <-- mesh wifi connection--> WiFi AP02 EAP245 ---> wired connection to switch tl-sg2008P--> wired connection to LAB server in the basement

 

Create 4 LAN :

1. secure with Vlan 1 (purpouse : interface) 172.16.171.1/24

2. home with vlan 10 (purpouse : interface) 172.16.172.1/24

3. guest with vlan 20 (purpouse : interface) 172.16.173.1/24

4. iot with vlan 30 (purpouse : interface) 172.16.174.1/24

 

Created 4 wireless SSID (broadcasting, using all bands on all wifi)

1.sec vlan 1 (getting no IP address from dhcp)

2.home vlan 10 (works fine)

3.guest vlan 20 (getting IP address but no internet, ping outside times out, dns resolution does not work)

4.iot vlan 30 (works fine)

 

Here is my issue: would like to have internet available for all networks.
There are no ACL in place yet.

 

Where should I look for clues first ?

 

Any ideas ?

Thanks in advace!

1x ER-7206 1x C200 2x EAP245 1x SG2008P
  0      
  0      
#1
Options
1 Accepted Solution
Re:Mutiple networks and dhcp-Solution
2022-12-28 18:56:49 - last edited 2022-12-28 19:38:13

  @ProSumerTester 

Issue is resolved.
sec SSID worked after I removed vlan nr (empty default) from SSID setup.

guest dns worked when I removed forgoten ACL rules, guest SSID is by default set to denied to all other vlans and local dns.

 

1x ER-7206 1x C200 2x EAP245 1x SG2008P
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Mutiple networks and dhcp
2022-12-27 08:00:55

  @ProSumerTester 

 

Has the profile been applied to the switch's ports?
Have you set up a management VLAN?

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:Mutiple networks and dhcp
2022-12-27 08:17:04

  @Virgo 

How do I check if profile has been applied ?
Come to think of it not sure if that is relevant since both my AP are connected to router before switch is even in play.

 

By Management you mean a default VLAN (1) ? If so then yes its in place.

 

 

1x ER-7206 1x C200 2x EAP245 1x SG2008P
  0  
  0  
#3
Options
Re:Mutiple networks and dhcp-Solution
2022-12-28 18:56:49 - last edited 2022-12-28 19:38:13

  @ProSumerTester 

Issue is resolved.
sec SSID worked after I removed vlan nr (empty default) from SSID setup.

guest dns worked when I removed forgoten ACL rules, guest SSID is by default set to denied to all other vlans and local dns.

 

1x ER-7206 1x C200 2x EAP245 1x SG2008P
Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 351

Replies: 3

Related Articles