Home

Forums

Stories

Knowledge Base

Business Community > WiFi > Device Shows Connected, but no IP address (both using static and dynamic)

< WiFi

Device Shows Connected, but no IP address (both using static and dynamic)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Device Shows Connected, but no IP address (both using static and dynamic)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MannyF

2023-01-06 23:17:49

Posts: 28

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2021-10-06

Device Shows Connected, but no IP address (both using static and dynamic)

2023-01-06 23:17:49

Model: EAP225-Wall

Hardware Version:

Firmware Version:

Hi All,

I have a device that shows as connected but will not get an IP address. I have tried both setting it to a static device with an unused IP address and dynamic DHCP. I have also tried restarting the device, clicking reconnect in Omada SDN and checked the Events in Omada which don't show any indication why.

Any suggestions?

1 Reply

Somnus

LV5

2023-01-09 05:30:27

Posts: 1212

Helpful: 221

Solutions: 72

Stories: 0

Registered: 2021-06-14

Re:Device Shows Connected, but no IP address (both using static and dynamic)

2023-01-09 05:30:27

@MannyF

Did not see this problem before. However I feel it may be related to the router/DHCP server.

Make sure this deivce is conencted to a working SSID(if you setup VLANs), and your router have the newest firmware. Then reboot the router.

Device Shows Connected, but no IP address (both using static and dynamic)

Device Shows Connected, but no IP address (both using static and dynamic)

Information

Voters 0

Tags