Two WIFI with different Frequences
Hello, I wanted to ask if it is possible to set up a second WIFI (guest) and enable only 5GHz there while running 2.4 and 5GHz in the other WIFI.
I have tried it, but in the 2.4 network many Smarthome devices go offline.
Happy days
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Sure this is possible - just make sure your main WiFi and the Guest WiFi have different names and all devices are connected to the proper one.
- Copy Link
- Report Inappropriate Content
Thank you - i will try again, but what you mean with "... all devices are connected to the proper one."
- Copy Link
- Report Inappropriate Content
The question is what do YOU mean with "but in the 2.4 network many Smarthome devices go offline."
As long as you setup everything correctly and connect every smart device to the proper SSID ("WiFi") then everything should be fine.
Make sure every device get its IP address and don't mess around with VLAN settings or WPA (security) settings.
In most cases it's way easier to setup a new WiFi (SSID) from scratch than spending time to find the mistake in previous setups.
Saying this because setting up a WiFi in Omada is really simple and straight forward.
- Copy Link
- Report Inappropriate Content
Ok - as Fan from FCB we can write german
Ich hab jetzt das zweite WLAN eingerichtet - nicht als Gast-WLAN.
es scheint zu laufen. Beim ersten Mal habe ich als Gast-WLAN eingerichtet und die Shelly-Smarthome Teile verloren die Verbindung zum ersten WLAN.
Ich beobachte es weiter.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 486
Replies: 4
Voters 0
No one has voted for it yet.