Business Community > Routers > Router ER605 firmware upgrade failed with error "invalid file"
< Routers

Router ER605 firmware upgrade failed with error "invalid file"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Router ER605 firmware upgrade failed with error "invalid file"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Router ER605 firmware upgrade failed with error "invalid file"
Router ER605 firmware upgrade failed with error "invalid file"
2023-03-05 03:21:21 - last edited 2023-03-11 19:45:30
Tags: #Firmware Update
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.1

I tried several times to upgrade the ER605 (European version) from v2.1.1 to v2.1.2 always with the error message "Upgrading Router-ER605 failed because the upgrade file is invalid. Please select the correct file.". See attached picture

I started upgrading the "standard" way via the omada sw controller. After that I downloaded the file from the TP-Link support site and tried it manually with ER605(UN)_v2_2.1.2 Build20230210. After that with ER605(UN)_v2_2.1.1 Build 20230115 and I tried to downgrade to ER605(UN)_v2_2.0.1 Build 20220223 always without success and the same error message.

I rebooted the router via omada sw controller and via power off/on. No difference, I always end up with the error message that the file is invalid.

 

Any idea what I can try to solve this issue? Maybe to delete an old file or data entry somewhere?

Or do I have to do a firmware reset on the router?

 

Any advice is welcome

Andy

 

PS: an earlier upgrade from v2.0.1 to v2.1.1 worked without problems

File:
Bildschirmfoto vom 2023-02-03 21-45-17.pngDownload
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Router ER605 firmware upgrade failed with error "invalid file"-Solution
2023-03-11 19:44:00 - last edited 2023-03-11 19:45:30

  @rewe68 

 

 

Hi Hank21,

 

finally I could upgrade the router to the latest firmware.

 

First I did a hardware reset and re-adopted the router in the omada controller software and tried to update the firmware like you suggested, unfortunately again with the same error.

Therefore I did again a router reset but this time I upgraded the firmware in the standalone mode directly from my laptop. This way it was successful.

Afterwards I re-adopted the router and it's running again under omada control without any problems.

To get all settings back (like the device name) I did a restore of the latest backupfile 

 

@Hank21 thanks for your support.

 

Andy

 

 

Recommended Solution
  0  
  0  
#8
Options
7 Reply
Re:Router ER605 firmware upgrade failed with error "invalid file"
2023-03-06 06:54:57

Hi  @rewe68 

 

May I know the Omada Controller version you are using?

 

I did a test with the newest version controller V5.9.9 and I cannot see the same issue. Just in case please confirm:

1. You have unzip the fimrware file and upload the .bin file on the controller;

2. Please login the Omada Controller via it's local IP address(not from cloud website);

3. Make sure the router and the controller are in the same network subnet.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Router ER605 firmware upgrade failed with error "invalid file"
2023-03-06 14:41:44 - last edited 2023-03-06 14:48:48

  @Hank21

 

Hi Hank21 ,

 

to answer your questions.

 

1. You have unzip the fimrware file and upload the .bin file on the controller;

--> Yes, file was unziped and the .bin manually uploaded within the "router setting function" of the omada controller as well as the download/update button at the "devices overview"

2. Please login the Omada Controller via it's local IP address(not from cloud website);

--> I do the updates always locally

3. Make sure the router and the controller are in the same network subnet.

--> Yes there are both on the same IP subnet as well as the AP's and switch

 

BTW:

I tested the upgrade with omada controller v5.8.4 and since last weekend with v5.9.9 without success.

And a friend of mine has the same hardware and could update without any problems

 

Andy

 

 

 

  0  
  0  
#3
Options
Re:Router ER605 firmware upgrade failed with error "invalid file"
2023-03-07 04:31:19

Hi  @rewe68 

 

Have you tried a different web browser? If possible, please try Google Chorme incognito mode.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:Router ER605 firmware upgrade failed with error "invalid file"
2023-03-07 16:31:41 - last edited 2023-03-07 16:34:01

  @Hank21 

 

Thanks for the hint. I used Firefox only.

Tested to update with Edge and Chrome incl incognito mode, unfortunately without success.

Message: [Failed]Failed to upgrade Router-ER605 to firmware version 2.1.1 Build 20230115 Rel.77774 online.

and the information to "select the correct file" 

  0  
  0  
#5
Options
Re:Router ER605 firmware upgrade failed with error "invalid file"
2023-03-08 03:56:09

Hi  @rewe68 

 

Could you please try a hardware reset of this router? 

 

Don't worry the configurations since all settings are saved on your controller. After resetting you just need to re-adopt the router.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#6
Options
Re:Router ER605 firmware upgrade failed with error "invalid file"
2023-03-08 21:27:42

  @Hank21 

thank you Hank21.

I will reset the router when there is a good timeslot.

I thought I will end up with a reset.

 

I'll let you know about the result as soon I did it.

  0  
  0  
#7
Options
Re:Router ER605 firmware upgrade failed with error "invalid file"-Solution
2023-03-11 19:44:00 - last edited 2023-03-11 19:45:30

  @rewe68 

 

 

Hi Hank21,

 

finally I could upgrade the router to the latest firmware.

 

First I did a hardware reset and re-adopted the router in the omada controller software and tried to update the firmware like you suggested, unfortunately again with the same error.

Therefore I did again a router reset but this time I upgraded the firmware in the standalone mode directly from my laptop. This way it was successful.

Afterwards I re-adopted the router and it's running again under omada control without any problems.

To get all settings back (like the device name) I did a restore of the latest backupfile 

 

@Hank21 thanks for your support.

 

Andy

 

 

Recommended Solution
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1236

Replies: 7

Tags

Firmware Update
Related Articles
Failed to upgrade Router to firmware
190 0
ER605 firmware upgrade not working.
227 0
Upgraded firmware on my ER605 router - Safari unsupported?
3287 0
(ER605) Firmware upgrade (Skip Versions, direct upgrade to latest)
1033 0
Upgrade firmware ER706W failed
2443 2
TP-ER605: Export Adressreservation failed
446 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.