Old thread Monitor 2nd WAN status on ER605 using SNMP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello everyone,
I want to know if there are some evolutions after this thread
https://community.tp-link.com/en/business/forum/topic/511976
I've just installed a brand new appliance ER605 and I'm not able to understand where is the Wan2 interface.
this is the list of my interfaces now
with this command: snmpwalk -v 1 -c pub 192.168.10.1 .1.3.6.1.2.1.2.2.1.2
IF-MIB::ifDescr.1025 = STRING: default/lo
IF-MIB::ifDescr.1026 = STRING: default/eth0
IF-MIB::ifDescr.1027 = STRING: default/eth1
IF-MIB::ifDescr.1028 = STRING: default/ip6tnl0
IF-MIB::ifDescr.1029 = STRING: default/sit0
IF-MIB::ifDescr.1030 = STRING: default/gre0
IF-MIB::ifDescr.1031 = STRING: default/gretap0
IF-MIB::ifDescr.1032 = STRING: default/bond0
IF-MIB::ifDescr.1033 = STRING: default/veth0
IF-MIB::ifDescr.1036 = STRING: default/br-lan
IF-MIB::ifDescr.1037 = STRING: default/eth1.4094
IF-MIB::ifDescr.1038 = STRING: default/eth1.4093
IF-MIB::ifDescr.1040 = STRING: default/eth1.10
IF-MIB::ifDescr.1041 = STRING: default/eth1.10
IF-MIB::ifDescr.1042 = STRING: default/eth1.10
IF-MIB::ifDescr.1043 = STRING: default/eth1.4093
IF-MIB::ifDescr.1044 = STRING: default/eth1.10
IF-MIB::ifDescr.2049 = STRING: vnet/lo
IF-MIB::ifDescr.2050 = STRING: vnet/ip6tnl0
IF-MIB::ifDescr.2051 = STRING: vnet/sit0
IF-MIB::ifDescr.2052 = STRING: vnet/gre0
IF-MIB::ifDescr.2053 = STRING: vnet/gretap0
IF-MIB::ifDescr.2058 = STRING: vnet/veth1
IF-MIB::ifDescr.2059 = STRING: vnet/eth0.1
Thanks for your support.
Michele
