Hi guys

Hi first of all, the router works correctly with the web configuration.

I'm trying to use Omada about a mounth

But I got a few problens

My router have the first WAN in PPPoE mode, thats fine.

Lan1 and Lan2 have the Lan 192.168.0.0

I have two mercusys mg50 connected in these ports by its Wan ports.

Each Mercusys have respectively the ip, 192.168.1.0 and 192.168.2.0 and they connect on er605 by static ip respectively 192.168.0.11 and 192.168.0.12.

I made some routers and everything works fine.

In the Lan3 I have a tplink managed switch with the lan 192.168.10.0, and the computer get this ip. Everything its fine.

The problem is the Lan4 (the last port) its has the lan 174.162.40.10 (yep I want it be weird), In the last port I have another mercusys but no matter what I do, this last mercusys didnt get the ip, even if I change to static. If I connect one pc to this port, this pc doenst get the ip, even static it doesnt work.

I tried all Omada v5 versions but only the version 5.8 got support to pvid. 

Thanks in advance