Business Community > Business Routers > Connect to Omada Controller
< Business Routers

Connect to Omada Controller

Connect to Omada Controller

Connect to Omada Controller
Connect to Omada Controller
2023-03-23 10:25:04 - last edited 2023-03-24 07:17:08
Model: ER8411  
Hardware Version: V1
Firmware Version: 1.0.3

Hi Everyone,

 

I latest connect to Omada Cloud to check features in omada but when I deatached my device I had to restart device to default settings because I losed  access to standalone mode.

So i  need information when I connect to pc app Omada controller. Will I lose possibility to access standalone mode?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Connect to Omada Controller-Solution
2023-03-23 17:32:57 - last edited 2023-03-24 07:17:08
Hello, Yes, once your device was adopted and managed by a controller, the device need to be FORGET or reset to get his standalone mode back. There is no possibility to have both modus working in the same time.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Connect to Omada Controller-Solution
2023-03-23 17:32:57 - last edited 2023-03-24 07:17:08
Hello, Yes, once your device was adopted and managed by a controller, the device need to be FORGET or reset to get his standalone mode back. There is no possibility to have both modus working in the same time.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 91

Replies: 1

Related Articles
Can I access the internet on a non-EAP router while ER605 connects with the Omada controller?
246 0
Omada controller software not add ER605 device
623 0
Omata Controller (SDN) + VPN Router (ER605)
428 0
Protocol to replace router from ER605 to ER7206
366 0
Need help in setting up ER7206 router through Omada controller for a remote site.
162 0
Re:ER605 v2.0 - Port Forwarding with load balancing not working after upgrade to 2.1.1 and 2.1.2
77 0
About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.