EAP670 packet latency an jitter
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Change eap225 to eap670 and see a huge latency and jitter with some device. With eap225 on wifi AC was perfect...
Eap670- disable roaming,disable mesh- got a little better . Enable/disable "Unscheduled Automatic Power Save Delivery" and OFDMA - without result. Using channel 48 with width 160MHz.
Disable all off these,change channel number and channel width - no change. I see a icmp ping drift from 3 to 30ms on laptop with Intel AX210. Mobile phone - 20 to 300ms. Ping from Gateway to eap670 - always 1ms. And sometimes laptop show 100ms. Laptop and phone are located 5 meters from the access point.
On channel 48 I download a file to a laptop at a speed of 870 Mbps, and on channel 36 - no more than 600Mbps...
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, did this latency issue cause your network drops or slow speed?
How did you power the EAP670?
Maybe you can change a short cable to connect them for testing.
- Copy Link
- Report Inappropriate Content
I mean slow speed without drops. Eap powered with poe-injector tl-poe160s now. Trying to change with power supply - the same result. Cable is about 5 meters and it is OK, because ping from gw to point less than 1ms without drift.
Mobile phone are particularly affected.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Iperf3 test from server to phone in my network:
[ 5] 0.00-3.00 sec 276 MBytes 772 Mbits/sec 0 3.28 MBytes
[ 5] 3.00-6.00 sec 298 MBytes 832 Mbits/sec 0 3.84 MBytes
[ 5] 6.00-9.00 sec 294 MBytes 821 Mbits/sec 0 4.03 MBytes
[ 5] 9.00-12.00 sec 292 MBytes 818 Mbits/sec 0 4.03 MBytes
[ 5] 12.00-15.00 sec 294 MBytes 821 Mbits/sec 0 4.03 MBytes
[ 5] 15.00-18.00 sec 296 MBytes 828 Mbits/sec 0 4.03 MBytes
[ 5] 18.00-21.00 sec 299 MBytes 835 Mbits/sec 0 4.03 MBytes
[ 5] 21.00-24.00 sec 299 MBytes 835 Mbits/sec 0 4.03 MBytes
[ 5] 24.00-27.00 sec 299 MBytes 835 Mbits/sec 0 4.03 MBytes
[ 5] 27.00-30.00 sec 304 MBytes 849 Mbits/sec 0 4.03 MBytes
[ 5] 30.00-33.00 sec 305 MBytes 853 Mbits/sec 0 4.03 MBytes
[ 5] 33.00-36.00 sec 304 MBytes 849 Mbits/sec 0 4.03 MBytes
[ 5] 36.00-39.00 sec 302 MBytes 846 Mbits/sec 0 4.03 MBytes
[ 5] 39.00-42.00 sec 308 MBytes 860 Mbits/sec 0 4.03 MBytes
[ 5] 42.00-45.00 sec 305 MBytes 853 Mbits/sec 0 4.03 MBytes
[ 5] 45.00-48.00 sec 304 MBytes 849 Mbits/sec 0 4.03 MBytes
[ 5] 48.00-51.00 sec 306 MBytes 856 Mbits/sec 0 4.03 MBytes
Iperf3 test from phone to server in my network:
[ 5] 0.00-3.00 sec 276 MBytes 772 Mbits/sec
[ 5] 3.00-6.00 sec 284 MBytes 793 Mbits/sec
[ 5] 6.00-9.00 sec 290 MBytes 812 Mbits/sec
[ 5] 9.00-12.00 sec 292 MBytes 816 Mbits/sec
[ 5] 12.00-15.00 sec 293 MBytes 820 Mbits/sec
[ 5] 15.00-18.00 sec 277 MBytes 775 Mbits/sec
[ 5] 18.00-21.00 sec 272 MBytes 761 Mbits/sec
[ 5] 21.00-24.00 sec 277 MBytes 773 Mbits/sec
[ 5] 24.00-27.00 sec 281 MBytes 786 Mbits/sec
[ 5] 27.00-30.00 sec 286 MBytes 799 Mbits/sec
[ 5] 30.00-33.00 sec 289 MBytes 809 Mbits/sec
[ 5] 33.00-36.00 sec 289 MBytes 809 Mbits/sec
[ 5] 36.00-39.00 sec 290 MBytes 811 Mbits/sec
[ 5] 39.00-42.00 sec 292 MBytes 817 Mbits/sec
[ 5] 42.00-45.00 sec 291 MBytes 813 Mbits/sec
[ 5] 45.00-48.00 sec 279 MBytes 780 Mbits/sec
Ping from server to phone in my network:
64 bytes from 192.168.77.13: icmp_seq=1 ttl=64 time=301 ms
64 bytes from 192.168.77.13: icmp_seq=2 ttl=64 time=118 ms
64 bytes from 192.168.77.13: icmp_seq=3 ttl=64 time=346 ms
64 bytes from 192.168.77.13: icmp_seq=4 ttl=64 time=877 ms
64 bytes from 192.168.77.13: icmp_seq=5 ttl=64 time=35.3 ms
64 bytes from 192.168.77.13: icmp_seq=6 ttl=64 time=292 ms
64 bytes from 192.168.77.13: icmp_seq=7 ttl=64 time=542 ms
64 bytes from 192.168.77.13: icmp_seq=8 ttl=64 time=4.23 ms
64 bytes from 192.168.77.13: icmp_seq=9 ttl=64 time=46.0 ms
64 bytes from 192.168.77.13: icmp_seq=10 ttl=64 time=211 ms
64 bytes from 192.168.77.13: icmp_seq=11 ttl=64 time=118 ms
64 bytes from 192.168.77.13: icmp_seq=12 ttl=64 time=345 ms
64 bytes from 192.168.77.13: icmp_seq=13 ttl=64 time=224 ms
64 bytes from 192.168.77.13: icmp_seq=14 ttl=64 time=1455 ms
64 bytes from 192.168.77.13: icmp_seq=15 ttl=64 time=430 ms
64 bytes from 192.168.77.13: icmp_seq=16 ttl=64 time=1433 ms
64 bytes from 192.168.77.13: icmp_seq=17 ttl=64 time=419 ms
64 bytes from 192.168.77.13: icmp_seq=18 ttl=64 time=649 ms
64 bytes from 192.168.77.13: icmp_seq=19 ttl=64 time=161 ms
64 bytes from 192.168.77.13: icmp_seq=20 ttl=64 time=288 ms
64 bytes from 192.168.77.13: icmp_seq=21 ttl=64 time=208 ms
Ping from server to eap670:
64 bytes from 192.168.77.3: icmp_seq=1 ttl=64 time=0.521 ms
64 bytes from 192.168.77.3: icmp_seq=2 ttl=64 time=0.480 ms
64 bytes from 192.168.77.3: icmp_seq=3 ttl=64 time=0.574 ms
64 bytes from 192.168.77.3: icmp_seq=4 ttl=64 time=0.564 ms
64 bytes from 192.168.77.3: icmp_seq=5 ttl=64 time=0.391 ms
64 bytes from 192.168.77.3: icmp_seq=6 ttl=64 time=0.484 ms
64 bytes from 192.168.77.3: icmp_seq=7 ttl=64 time=0.570 ms
64 bytes from 192.168.77.3: icmp_seq=8 ttl=64 time=0.554 ms
64 bytes from 192.168.77.3: icmp_seq=9 ttl=64 time=0.565 ms
64 bytes from 192.168.77.3: icmp_seq=10 ttl=64 time=0.553 ms
64 bytes from 192.168.77.3: icmp_seq=11 ttl=64 time=0.592 ms
64 bytes from 192.168.77.3: icmp_seq=12 ttl=64 time=0.541 ms
64 bytes from 192.168.77.3: icmp_seq=13 ttl=64 time=0.571 ms
64 bytes from 192.168.77.3: icmp_seq=14 ttl=64 time=0.516 ms
64 bytes from 192.168.77.3: icmp_seq=15 ttl=64 time=0.461 ms
64 bytes from 192.168.77.3: icmp_seq=16 ttl=64 time=0.485 ms
64 bytes from 192.168.77.3: icmp_seq=17 ttl=64 time=0.506 ms
64 bytes from 192.168.77.3: icmp_seq=18 ttl=64 time=0.677 ms
64 bytes from 192.168.77.3: icmp_seq=19 ttl=64 time=0.470 ms
Phone location - static in one place.Ping on free network without any traffic(no any other WiFi client are connected to eap670 and no another traffic from the phone except ping).
Also at 48 channel the speed is high then at 36 channel.
- Copy Link
- Report Inappropriate Content
Connect to the same Organization eap225-outdoor v1 - no issue packet latency and jitter with the same setting. But when clients connect to eap670, the problem reappears.
- Copy Link
- Report Inappropriate Content
Hi @g2_ufo ,
Did you get the solution to this?
Facing the same issue with EAP265 HD and no luck yet.
Regards
- Copy Link
- Report Inappropriate Content
Can we confirm the signal strength of the client you are testing with? Before you do the speed test?
Also, what's the RX/TX numbers of the tested client? During the test.
We need to know those numbers before we make a brash decision on this AP.
Also there is a new Beta firmware out, go ahead and upgrade and retest, BUT get those numbers I request above before retesting.
Also, can you confirm that your Intel wireless card has the newest firmware loaded FROM the intel site and not from windows update before the retest.
- Copy Link
- Report Inappropriate Content
This latency to reach the AP is unacceptable, and If I chage the AP to a different brand with same config the issue just desapear.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 770
Replies: 8
Voters 0
No one has voted for it yet.