TL-SG3452X snmp monitoring in Zabbix 6.0 LTS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG3452X snmp monitoring in Zabbix 6.0 LTS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG3452X snmp monitoring in Zabbix 6.0 LTS
TL-SG3452X snmp monitoring in Zabbix 6.0 LTS
2023-04-04 14:58:04
Tags: #SNMP
Model: TL-SG3452X  
Hardware Version: V1
Firmware Version: 1.0.5

I configured this switch in Zabbix using the Zabbix supplied Template "TP-LINK SNMP".

This works but the values seem incorrect.

Eg one of the 10Gb ports I see max traffic of 150Mbps in Zabbix while I see 1.5Gb in the oc200 statistics at the same time.

 

I did not install the tp-link mib files on my Zabbix host. Should I have done this and if so all?

  0      
  0      
#1
Options
2 Reply
Re:TL-SG3452X snmp monitoring in Zabbix 6.0 LTS
2023-04-06 03:50:27

Hi @cdnhk,

 

Could you please share some screenshots to show the issue?

May I know your network layout/topology?

 

What is the firmware version of OC200?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:TL-SG3452X snmp monitoring in Zabbix 6.0 LTS
2023-04-06 08:45:10

  @Hank21 

 

Hi,

 

This is the TP-Link snmp template

 

 

On a typical day on interface 51 (10Gb) is now see the following traffic

 

 

I manually created an SNMP template to monitor the same switch. No I do see correct values.

 

 

It's not the same day but normally we would see a big spike at 17:00 because backups start.

 

I think the problem is in the TP-LINK template supplied by Zabbix (6.0 LTS) but can work with the self created setup I now have.

 

I use latest OC200 firmware.

Topology is pretty simple. 3 ESX servers and a Synology NAS connected to the 10Gb ports, rest of the clients to the 1Gb ports. 2 VLANs (one guest for Wifi and some assigned (untagged) ports).

 

 

  0  
  0  
#3
Options