Switches
Hi I have ER605 as gateway and tl-sg2210p as managed switch poe. i want wnen connected device, the switch will check if the mac is allowed (not only on specific port\s, on all the switch). like cisco
ConfigurationSNMPport security
0Helpful
549Views
In monitoring or inventory systems such as Zabbix or GLPI, communication with network devices is generally via SNMP. The problem is that when you scan using: snmpwalk -v2c -c -t15 -Cc -On -Ox .1 you d
SNMPVLAN & Multi-Networks
1Helpful
620Views
Hi all, can anybody share an OID`s sequences for setting the IP address, subnet mask, and Default Gateway via SNMP for a T1500G-10PS 2.0 device?
ConfigurationSNMP
3Helpful
953Views
Hello, Switch SG3428X 1.30 ,configured with 8 VLANs, but only the first 2 are reported via SNMP v2. snmp walk output: currently configured vlans snmp configuration any help is appreciated Regards
VLAN & Multi-NetworksConfigurationSNMP
2Helpful
650Views
Hello, I have reviewed the forum rules and ensured that I am following them by searching for related posts before creating this thread. I hope I have placed my question in the correct category and use
SNMP
2Helpful
1085Views
Dear all, I have an issue with integrating my TL-SG2428P with SNMP to Zabbix. I am using the TL Link Template in Zabbix and I am getting back most of the preconfigured values, like uptime, firmware et
ConfigurationNetwork ConnectivitySNMP
By
Lepporello
· Latest post 2024-09-04 01:53:08
by Clive_A
3Helpful
1907Views
I need some help how I can get SNMPv3 data that will be monitored by Zabbix? I already test all template for SNMPv2 or v3 from TP-Link website but still didn't work
SNMP
0Helpful
1872Views
Hello I Need to know if this switch support the commands over SNMP to change the status of a POE port ON/OFF If possible can you please let me know wher I can find the correct string to perform this ?
ConfigurationSNMP
0Helpful
1919Views
DES encryption is considered insecure (it was broken in 1999) and was retired by NIST in 2005 because of its weakness. Similarly, SHA-1 has been deprecated by NIST due to its insecurity. Are there any
SNMP
By
stevenbright
· Latest post 2023-07-04 02:15:51
by Clive_A
1Helpful
1331Views
I configured this switch in Zabbix using the Zabbix supplied Template "TP-LINK SNMP". This works but the values seem incorrect. Eg one of the 10Gb ports I see max traffic of 150Mbps in Zabbix while I
SNMP
0Helpful
4932Views
Hello, my T2600G-28TS v2 is currently running on firmware 20170928. I am trying to use SNMP v3 to access my switch from the network monitoring tool Observium. I tried everything with my SNMP v3 config
SNMPFirmware Update
0Helpful
1108Views
Hello, The network has about 15 IP camera all with a data rate limited to 1024Kbs, and about 6 Mumble VOIP clients (72Kbs). I have installed a two of TL-SG1024DE 24port easy smart switches as the prod
SNMP#Monitor
By
BadgerBadger
· Latest post 2023-03-24 06:19:57
by Virgo
0Helpful
2706Views