@carbo56 

I just realized that the OC200 will only connect in 10/100, it doesn't have a gigbit port.   Still need to troubleshoot the EAP, need to check the cable.

carbo56 wrote

Hi,

I have Frontier 1G service, with going into a ER605 v2.0 router and a SG2008P switch.    The four PoE ports are going out to a OC200 controller and three EAP620's.  Wiring is Cat 6 throughout.   Two of those four devices (the OC200 and one of the EAPs) are connecting at 10/100 Mbps and the other two are connecting at 1000.   I thought maybe it was a wiring issue, but its not - I swaped my Macbook into the tap where the OC200 is and it connects at 1000 and speedtest is in the high 900's.    I've moved the connections between the four ports on the switch, and its aways the same devices that connect in 10/100, its not the port on the switch, its something to do with the devices, I guess.   I have other devices connected to the non-PoE ports and they all connect at 1000, including a SG2008 (non PoE) switch, and all the devices connecting there are at 1000.

 

Any ideas?

 

Thanks.