What ports need to be opened in a NAT table for VIGI NVR1004H-4P
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
What ports need to be opened in a NAT table for VIGI NVR1004H-4P
Strange that the product I am referring to is not available in the Model dropdown box. I am referring to NVR1004H-4P
What is rhe port number that needs to be opened for the device in the gateway or router NAT table for port forwarding, both source and destination. As a temporary measure I have had to set up a DMZ for the IP address so that the NVR can connect to the internet.
Regards
Re:What ports need to be opened in a NAT table for VIGI NVR1004H-4P
Hi @NotAFan
Thanks for posting in our business forum.
This lists the common ports used by the VIGI devices. Same thing for the NVR.
How to use VIGI cameras with other NVR brands or NAS
In addition:
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting Manual ★ ☚
(Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)