EAP650 can't access to my NAS but as access to the reste of my local network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP650 can't access to my NAS but as access to the reste of my local network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP650 can't access to my NAS but as access to the reste of my local network
EAP650 can't access to my NAS but as access to the reste of my local network
2023-09-03 10:08:57 - last edited 2023-09-06 01:11:45
Model: EAP650  
Hardware Version:
Firmware Version: 1.0.3 Build 20220316 Rel. 51972(4555)

Hi everyone.

 

I just install two TP-Link EAP 650 access point to my network as below:

 

The NAS is connected to The Switch with a functional LAG. I'm able to connect to it if i'm connected to the router Wifi...

 

every seams working nice if i'm connected to The AP (i have internet access, acces to my local device) except that i can access to my NAS...

i was able to ping the rest of my local network but NAS without success....

 

At the beginning i have think about my NAS Security & Firewall settings... To test it i have disable it & the issue is still the same...

 

Do you have some idea about what can happens here?

There is some mode on the AP which should be enabled?

 

Thanks a lot for your help

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:EAP650 can't access to my NAS but as access to the reste of my local network-Solution
2023-09-05 09:57:18 - last edited 2023-09-06 01:11:45

  @Virgo thank yu for your reply.

The issue is now solved... the problem was coming from the LAG... once deleted it was working perfectly.

I have created a new one on the NAS with different parameter (Static LAG), & That was finally working smooth.

 

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:EAP650 can't access to my NAS but as access to the reste of my local network
2023-09-04 09:27:33

  @Rbatimus 

 

Did you set any ACLs or VLAN separate the network?

What about enabling the mDNS on the EAP?

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:EAP650 can't access to my NAS but as access to the reste of my local network-Solution
2023-09-05 09:57:18 - last edited 2023-09-06 01:11:45

  @Virgo thank yu for your reply.

The issue is now solved... the problem was coming from the LAG... once deleted it was working perfectly.

I have created a new one on the NAS with different parameter (Static LAG), & That was finally working smooth.

 

Recommended Solution
  0  
  0  
#3
Options