Voice lan don't tag port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Voice lan don't tag port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Voice lan don't tag port
Voice lan don't tag port
2023-11-27 15:22:42 - last edited 2023-11-30 01:47:50
Model: TL-SG2428P  
Hardware Version: V4
Firmware Version: 4.0.1 Build 20211105 Rel.57589
Good morning

I have a router from the Internet Service Provider Huawei, configured with voip on vlan 20 and data on vlan 1, with cisco phones connected, I cannot access the router because I have not been provided with the passwords

So the scenario is
Phones on vlan 20
PC on vlan 1

I have a Tp-Link JetStream 28-Port Gigabit Smart Switch with 24-Port PoE+

TL-SG2428P 4.0

I'm having trouble understanding and configuring the voice vlan

I create vlan 20
I tag the ports where the phones are connected
I enable voice vlan in the QoS menu

When I reboot the switch, I find all ports untagged on vlan 20

Why?

I come from the Cisco world, this is the first time I interact with Tp-Link, I'm having a little difficulty understanding the logic

Thank you so much
  0      
  0      
#1
Options
1 Accepted Solution
Re:Voice lan don't tag port-Solution
2023-11-28 05:35:10 - last edited 2023-11-30 01:47:50

Hi @Radamante 

Thanks for posting in our business forum.

Did you click the "Save" button on the switch? If no, your config will not be saved to the device and will be lost after a reboot.

That is the only possibility for me in this situation. Can you verify your steps?f

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Voice lan don't tag port-Solution
2023-11-28 05:35:10 - last edited 2023-11-30 01:47:50

Hi @Radamante 

Thanks for posting in our business forum.

Did you click the "Save" button on the switch? If no, your config will not be saved to the device and will be lost after a reboot.

That is the only possibility for me in this situation. Can you verify your steps?f

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 290

Replies: 1

Related Articles