Business Community > General Discussion > Please help me select hardware
< General Discussion

Please help me select hardware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Please help me select hardware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Please help me select hardware
Please help me select hardware
2023-12-07 18:10:53 - last edited 2023-12-07 18:12:49

I asked this on the Home community and was told that I was asking in the wrong community, so...

 

Here's my situation.

My Verizon CR1000 router has hit a soft limit on the number of connections, so I am looking to replace it.  I have 110 devices, 76 are 2.4GHz WiFi, 2 are 5GHz and the rest are Ethernet.  It appears through experimentation that when I try to connect more than 65 devices, they just won't connect.

 

I am leaning toward the TP Link Omada ER7206 router and a couple of TP Link EAP-650 Access Points.  Would this combination be sufficient for my network, or would another selection be better?

  0      
 
  0      
 
#1
Options
3 Reply
Re:Please help me select hardware
2023-12-08 02:08:06

Hi @SteveMann 

Thanks for posting in our business forum.

So, usually, the wireless capacity for a single wireless product would be around 30-60. If it reaches more, you might check the wireless load balancing settings to set for higher capacity before it load balance between 2.4G and 5GHz.

 

I guess you have many IoT stuff? That might be a good idea to use the setup you are leaning toward.
ER7206 is capable of around 100 or 200 devices(non-IoT). So I think it might be a wise choice. But if you want to be future-proof or need a more powerful one. You might consider ER8411.

 

You can try out ER7206 first. It should suffice if you have many IoT stuff. IoT actually is not a heavy-traffic device. So, it does not affect much on your network.

EAP, you might consider getting some units. Regular version without HD carries less. HD version would be a high-density version for commercials.

Regular one carries as many as the regular routers. Single band would take 30-60. Dual 60-120.. So you might need several of them to balance the wireless connections.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:Please help me select hardware
2024-01-29 07:23:18

  @SteveMann 

Where you learn this : TP Link Omada ER7206 router ?

Regards Chitra Mishra
  0  
  0  
#3
Options
Re:Please help me select hardware
2024-01-29 16:51:58

  @chitra150 
Where did I learn what?
By the way, there is an error in my original post. I called my IOT things "devices", but I learned later that I should have said "clients".

 

Here is my device list:

ER7206 Router
EAP-610 Access Point (2)
EAP-615-Wall Access Point (2)
TL-SG1210P 8 Port Gigabit PoE Switch,
TL-SG1005P 5 Port Gigabit PoE Switch
TL-POE10R PoE Splitter
 

I am quite happy with my LAN using Omada.

For the controller, I have a Raspberry Pi4 in my server room that is running the software controller.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 579

Replies: 3

Related Articles
 HELP ME PLEASE
691 0
 Help please!
444 0
ER605 ACL Setup - Help Please
585 0
 Please help me understand this
778 0
 Please help me about routing
1233 0
 Urgent help please
1531 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.