Business Community > Pharos Wireless Bridges > Cpe710
< Pharos Wireless Bridges

Cpe710

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cpe710

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cpe710
Cpe710
2023-12-08 04:57:58 - last edited 2023-12-25 09:59:16
Model: CPE710  
Hardware Version: V1
Firmware Version: 2.2.1

Hello i have a cpe 710 as access point connected to 10 cpe 610 as clients.. the distance between the acces point and clients id 4 km .. but in the night the connection is down ..i chearch for maxtream on cpe710 i dont found it .. is there any advises ..how i can configure this to have the best internet speed 

Thanks a lot

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Cpe710-Solution
2023-12-11 03:02:03 - last edited 2023-12-25 09:59:16

Hi @Yassin23 

Thanks for posting in our business forum.

CPE710 is not made to be point-to-multiple-points. CPE710 is the directional antenna and it sends a straight beam. So, it does not have the option MAXtream. Consider other models to be the main CPE. Use 710 as the client.

Either 710 to 710. Or other 5GHz models(maybe 610) to 710s and 610s.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced. ● I don't provide ETA for any products/features. No comment.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Cpe710-Solution
2023-12-11 03:02:03 - last edited 2023-12-25 09:59:16

Hi @Yassin23 

Thanks for posting in our business forum.

CPE710 is not made to be point-to-multiple-points. CPE710 is the directional antenna and it sends a straight beam. So, it does not have the option MAXtream. Consider other models to be the main CPE. Use 710 as the client.

Either 710 to 710. Or other 5GHz models(maybe 610) to 710s and 610s.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced. ● I don't provide ETA for any products/features. No comment.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 810

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.