cannot access console through https for T2600G-28TS
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
for T2600G-28TS
can access console through http
but cannot access console through https
Browser Error message
Secure Connection Failed
...
Error code: SSL_ERROR_NO_CYPHER_OVERLAP
http works
https cannot work
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hii @comp-eng-louis
Thank you so much for taking the time to post the issue on TP-Link community!
comp-eng-louis wrote
1. Was it on default settings for HTTPS related parameters? Did you change anything about the certificate?
Default settings, just enabled HTTPS access
No, I did not change anything about the certification
2. Try a different browser. Use the Chrome and try again in incognito mode.
Tried, still not work
To better assist you, I've created a support ticket via your registered email address. The ticket ID is TKID240147632, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
1. Was it on default settings for HTTPS related parameters? Did you change anything about the certificate?
2. Try a different browser. Use the Chrome and try again in incognito mode.
- Copy Link
- Report Inappropriate Content
1. Was it on default settings for HTTPS related parameters? Did you change anything about the certificate?
Default settings, just enabled HTTPS access
No, I did not change anything about the certification
2. Try a different browser. Use the Chrome and try again in incognito mode.
Tried, still not work
- Copy Link
- Report Inappropriate Content
Hii @comp-eng-louis
Thank you so much for taking the time to post the issue on TP-Link community!
comp-eng-louis wrote
1. Was it on default settings for HTTPS related parameters? Did you change anything about the certificate?
Default settings, just enabled HTTPS access
No, I did not change anything about the certification
2. Try a different browser. Use the Chrome and try again in incognito mode.
Tried, still not work
To better assist you, I've created a support ticket via your registered email address. The ticket ID is TKID240147632, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
I got the firmware from Tplink and after upgraded it, the HTTPS works (TLS 1.2)
T2600G-28TSv3_en_3.0.3_[20190820-rel31703(Beta)]_up.rar
- Copy Link
- Report Inappropriate Content
The https problem is fixed
but the system time has problem, alway go back to 2006-01-01 for each reboot or (shutdown & power on)
I post another topic
https://community.tp-link.com/en/business/forum/topic/652506
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 588
Replies: 5
Voters 0
No one has voted for it yet.