cant connect to IP for device using 192.168.0.254

cant connect to IP for device using 192.168.0.254

cant connect to IP for device using 192.168.0.254
cant connect to IP for device using 192.168.0.254
2024-02-29 05:03:35 - last edited 2024-03-01 01:56:40
Model: CPE210  
Hardware Version: V3
Firmware Version:

cant connect to the cpe ip address, have used these  in the past but now cant configure the devices

  0      
  0      
#1
Options
2 Reply
Re:cant connect to IP for device using 192.168.0.254
2024-02-29 16:35:24 - last edited 2024-03-01 01:56:24

  @Snapper-69 

 

Did you factory default them?

 

If you have wireshark, you can sniff the traffic on the CPE210 port to see what IP it is using, if any.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:cant connect to IP for device using 192.168.0.254
2024-03-01 03:11:35

Hi @Snapper-69

 

To login to the web UI of the CPE, please refer to the following steps:
     1. Connecting the CPE to your computer, the topology should be like connecting the CPE's LAN0 port to the PoE port of the PoE adapter, connecting the computer to the LAN port of the PoE adapter, and plug the PoE adapter into the power socket.
     2. Assigning a static IP address to your computer, like 192.168.0.10/255.255.255.0
     3. Launch a web browser, enter 192.168.0.254 in the address bar and press the Enter Key. Enter admin (all lowercase) for both username and password to login.
Here is a FAQ which provides a detailed setup walkthrough: https://www.tp-link.com/support/faq/710/
Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 333

Replies: 2

Related Articles