Muse #1 . . .

Box says; Version 1.6

Device label says; v1.6

Standalone controller says; Model: ER707-M2 v1.0

Omada controller says; Model: ER707-M2 v1.0

The muse is; How is it possible that the labels on the device/box do not reflect the actual H/W version of the device... and WHY?

Muse #2 . . .

Configuration of IPv6 via 6to4 Tunnel is straight-forward, gets a Connected status, IPv6 address for the WAN port [#1, 2.5G], and IPv6 addresses dispensed to CPE

However, no IPv6 traffic succeeds!

Since there is no Advanced / Network / IPv6 Tunnel setup panel - as shown in some online TP-Link guidelines - we assume that the IPS's designated 6rd server is not being accessed  ...this is confirmed by an non-compliant IPv6 prefix being received

The muse is; Why is there no IPv6 Tunnel configuration panel anywhere in the Standalone or Qmada controllers - which is essential for 6rd to function correctly?

We love the IPv4 performance and look forward to being able to enable IPv6 traffic as well.

Cheers,

Larry