Business Community > Switches > Can the TL-SX3008F handle being loaded with 4-8 TL-SM5310-T 10GbaseT modules?
< Switches

Can the TL-SX3008F handle being loaded with 4-8 TL-SM5310-T 10GbaseT modules?

Can the TL-SX3008F handle being loaded with 4-8 TL-SM5310-T 10GbaseT modules?

Can the TL-SX3008F handle being loaded with 4-8 TL-SM5310-T 10GbaseT modules?
Can the TL-SX3008F handle being loaded with 4-8 TL-SM5310-T 10GbaseT modules?
2024-04-02 01:12:40 - last edited 2024-04-02 06:46:53
Model: TL-SX3008F   TL-SX3206HPP  
Hardware Version:
Firmware Version:

Can the TL-SX3008F handle being loaded with 4-8 TL-SM5310-T 10GbaseT adapters?

 

I'm considering purchasing the TL-SX3008F and 4 TL-SM5310-T, but I might need to go up to 8. I've seen concerns about the power draw for the sfp+ to 10G rj45 modules.

 

I also have seen that the 10GBaseT modules can run hot. This unit is fanless so temp is also a concern.

 

Thank you!

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Can the TL-SX3008F handle being loaded with 4-8 TL-SM5310-T 10GbaseT modules?-Solution
2024-04-02 02:01:40 - last edited 2024-04-02 06:46:53

Hi @Drew504 

Thanks for posting in our business forum.

Temp would be your concern. Power isn't.

You can look this up in the Installation Guide. Datasheet would also be helpful to resolve your question in power draw.

 

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
  2  
  2  
#2
Options
2 Reply
Re:Can the TL-SX3008F handle being loaded with 4-8 TL-SM5310-T 10GbaseT modules?-Solution
2024-04-02 02:01:40 - last edited 2024-04-02 06:46:53

Hi @Drew504 

Thanks for posting in our business forum.

Temp would be your concern. Power isn't.

You can look this up in the Installation Guide. Datasheet would also be helpful to resolve your question in power draw.

 

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
  2  
  2  
#2
Options
Re:Can the TL-SX3008F handle being loaded with 4-8 TL-SM5310-T 10GbaseT modules?
2024-04-02 03:10:50

  @Clive_A, Thank you for the helpful and fast reply. I must have skimmed past that page. This is exactly what I was looking for. I appreciate your help!

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 105

Replies: 2

Related Articles
TL-SX3008F SND Capabilities
441 0
TL-SX3008F Trunk Ports
1166 0
TL-SX3008F 2.5GB support
815 0
Got 4 TL-PA7010P - can I combine them with TL-WPA860P kit ?
975 0
TL-SX3008F Invalid port number.
208 0
Does TL-MR6400 handle the B28 band ? (700Mhz
255 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.