EAP613 - syslog server not working

EAP613 - syslog server not working

EAP613 - syslog server not working
EAP613 - syslog server not working
2024-04-19 14:27:17 - last edited 2024-04-19 14:30:50
Model: EAP613  
Hardware Version: V1
Firmware Version: 1.4.4 Build 20240312 Rel. 38091(4555)

It seems that my AP EAP613 is not able to send syslog messages to an external destination. I verified using wireshark on syslog server side (192.168.98.145) and any packet is receive on port 514 from the AP I'm testing. Below the picture reporting the configuration on my AP.

 

syslogServerConfig

  0      
  0      
#1
Options
3 Reply
Re:EAP613 - syslog server not working
2024-04-19 15:02:24

  @subbustrato 

I did some additional tests and seems that syslog messages are sent just in the same subnet. According the screen I attached just messages with level WARNING (or higher) are sent

  0  
  0  
#2
Options
Re:EAP613 - syslog server not working
2024-04-22 05:38:36

 

subbustrato wrote

  @subbustrato 

I did some additional tests and seems that syslog messages are sent just in the same subnet. According the screen I attached just messages with level WARNING (or higher) are sent

Hi @subbustrato 

Thanks for sharing. The IP of the system log server should be a reachable destination for the EAP. If you would rather, you can enable the More Client Detail Log option so that the logs of clients will be sent to the server as well.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#3
Options
Re:EAP613 - syslog server not working
2024-04-24 08:24:32

  @Hank21 

 

I'm pretty sure that syslog server can be rached from myAPs, what I'm understanding is that there are no already known issues about the ability to forward syslog messages outside the local network of the APs... In next days I'm going do do more additional test.

Many thanks for the support.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 133

Replies: 3

Related Articles