captive portal
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello tech community,i recquest for help on setting up captive portal on lan ports in omada network. i have sg3210 switch and omada controller oc200.
i realised this because some of my clients are on LAN while others connect via wifi access points.and i have other access points that are non tplink but what to use on my omada setup.thanks for help in advance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Torach
Thanks for posting in our business forum.
Torach wrote
@Clive_A ok, though problem not solved.
There is no switch portal because the switch plays a role in L2. EAP got its SSID portal. Router got its Network portal. Looks like you have neither of them which means you cannot use the portal though you can configure them in the controller web but it is not gonna work.
- Copy Link
- Report Inappropriate Content
@Clive_A i finally found away to add non tplink access points to the omada network without hastle.i can also do portal authentification on any Lan ports on the switch.thanks
Clive_A wrote
Hi @Torach
Thanks for posting in our business forum.Torach wrote
@Clive_A ok, though problem not solved.
There is no switch portal because the switch plays a role in L2. EAP got its SSID portal. Router got its Network portal. Looks like you have neither of them which means you cannot use the portal though you can configure them in the controller web but it is not gonna work.
- Copy Link
- Report Inappropriate Content
Hi @Torach
Thanks for posting in our business forum.
I recall that the portal requires the router if you choose the portal to be network and if you have EAP, use the SSID, but if you don't have either of them. You cannot set it up with the switch and a controller.
- Copy Link
- Report Inappropriate Content
@Clive_A ok, though problem not solved.
- Copy Link
- Report Inappropriate Content
Hi @Torach
Thanks for posting in our business forum.
Torach wrote
@Clive_A ok, though problem not solved.
There is no switch portal because the switch plays a role in L2. EAP got its SSID portal. Router got its Network portal. Looks like you have neither of them which means you cannot use the portal though you can configure them in the controller web but it is not gonna work.
- Copy Link
- Report Inappropriate Content
@Clive_A i finally found away to add non tplink access points to the omada network without hastle.i can also do portal authentification on any Lan ports on the switch.thanks
Clive_A wrote
Hi @Torach
Thanks for posting in our business forum.Torach wrote
@Clive_A ok, though problem not solved.
There is no switch portal because the switch plays a role in L2. EAP got its SSID portal. Router got its Network portal. Looks like you have neither of them which means you cannot use the portal though you can configure them in the controller web but it is not gonna work.
- Copy Link
- Report Inappropriate Content
@Torach Adding omada system to my network bussiness was really interesting though out of hustle.i have many enginious access points,for now,they are all working well with Omada network.
- Copy Link
- Report Inappropriate Content
@Torach Can you share how you've done this please as I have the same issue. Thanks!
- Copy Link
- Report Inappropriate Content
@MDG2022 sure,i have done so...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 796
Replies: 7
Voters 0
No one has voted for it yet.