ER605 not assigning static IP

ER605 not assigning static IP

ER605 not assigning static IP
ER605 not assigning static IP
2024-05-11 10:40:32 - last edited 2024-05-11 10:45:58
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.4

Hello,

 

I have a minimal setup where the problem occurs:

 

1x Er605 with latest firmware 2.2.4 without controller

1x PC with Win10 connected to LAN port of er605

 

I configure the er605:

192.168.18.1 

DHCP range:

192.168.18.2 - 192.168.18.200

 

At the router er605 I assign my PC to have static IP 192.168.18.220, everything works fine.

 

When I assign at the router er605 my PC to have the static IP 192.168.18.158 (within DHCP range), the PC does not get an IP assigned (it just gives itself 169.254.xxx.xxx). I tried everything, restarting, also resetting er605, always the same behaviour, my PC does not get an IP assigned (it should get 192.168.18.158).

 

I need to be able to assign static IP within DHCP range, this also worked with my previous 20€ Router.

 

Can you help me with my issue? Thank you.

  0      
  0      
#1
Options
5 Reply
Re:ER605 not assigning static IP
2024-05-14 05:43:37

Is really nobody having an answer to my very basic issue? I thought static IP issues have been solved with the last firmware updates. Thanks.

  0  
  0  
#2
Options
Re:ER605 not assigning static IP
2024-05-17 08:25:07

Ok, I will send this c*** back.

  0  
  0  
#3
Options
Re:ER605 not assigning static IP
2024-05-17 23:38:21

  @podersol1 It would be very helpful if you could provide screenshots of the configurations you have. I understand your position and I understand that er605 has some errors that should not exist knowing that it is tp link. I have an er605 and it does let me assign a static IP without problems but we need more information to help you  

  0  
  0  
#4
Options
Re:ER605 not assigning static IP
2024-05-19 12:26:59

  @Josvell thank you for your reply. I think with my description everyone should have a full picture about the configuration. What kind of screenshots or additional information do you need? 

  0  
  0  
#5
Options
Re:ER605 not assigning static IP
2024-05-19 12:47:43

  @Sunpower1 screenshots of the information you describe. It will be very useful because there could be something you are omitting. Could you provide capture of the dhcp configuration configuration when you try to assign static ip. Is the er605 controlled by omada or is it directly by the er605? 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 238

Replies: 5

Related Articles