WPA3 + Fast Roaming + 802.11r = No Roaming ?
Hello,
I try to setup my new Omada Network (1 eap650 on one building and 2 eap610 on another building), and i noticed with https://developer.apple.com/bug-reporting/profiles-and-logs/ i don't have fast roaming with WPA3 Personal. Buildings are separated in two sites in omada system
SSID with good fast roaming:

And the SSID with roaming problem:

PS : 802.11r unchecked here for testing, cuz I have the issue described here with this checkbox checked
On the WPA3 ssid, when i am connected to 2.4 Ghz and i come into 5Ghz -70 dBm or higher range, nothing happen. The otherway is the same, go out of 5ghz range just disconnect the phone
On the WPA2 SSID, when i am connected to 5 Ghz and i come to -70 dBm or lower signal strenght, my phone switch to 2.4 Ghz, and when i come back, my phone switch back around 15/20sec later.
I have issue on multi ap building too, the roaming happen when the iphone lost signal from its current AP for the problematic SSID, and for the other SSID in WPA2, all is fine.
PS1 : Advanced site settings

Same for 5Ghz
Thanks for your help
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
hello, some units don't receive the update yet, ex eap650, or eap615 us v1.80 in stable release
only early access for these units
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Does that mean the preview firmware could help?
EAP615GP-Wall_V1_1.0.50_20250811 (Pre-release)
- Copy Link
- Report Inappropriate Content
hi sorry I have issues back with 1.4.4 and 1.4.3 firmware of eap610, i rollback to 1.3.90 and all is ok
for eap650 i am on a test vers and it is ok for this ap
- Copy Link
- Report Inappropriate Content
Hi @mixman68
For more focused discussion, would you please start a new thread about your concern with the following info?
1. The hardware version of the EAP610.
2. The involved wireless clients;
3. The screenshots of the SSID config.
4. More details about the behavior.
mixman68 wrote
hi sorry I have issues back with 1.4.4 and 1.4.3 firmware of eap610, i rollback to 1.3.90 and all is ok
for eap650 i am on a test vers and it is ok for this ap
- Copy Link
- Report Inappropriate Content
hi, it is same issue and same problem, same configuration as this topic
i reverted to support provided firmware 1.3.90 for eap610v1 and 1.1.90 for eap650
fixes seems to be not included into released public firmwa
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 15434
Replies: 46
