Hello,

I am running a

TL-SG2428P v3.0 Switch,

two

EAP225 v5 AP

one

EAP653 V1 AP

and one

EAP225-Outdoor v3 AP.

All three "indoor" APs work like a charme, with PoE delivered from the switch.

further more two IP-Cameras are plugged to the switch using PoE and work as well.

Only the EAP225-Outdoor AP is not starting.

My switch is showing a "flash" for indicating, that PoE is active

#show power inline information interface gigabitEthernet 1/0/24       ### is switching:

Interface  Power(w)  Current(mA)  Voltage(v)  PD-Class  Power-Status    
---------- --------  -----------  ----------  --------  ----------------
Gi1/0/24   8.3       158          52.5        Class 4   ON      

Interface  Power(w)  Current(mA)  Voltage(v)  PD-Class  Power-Status    
---------- --------  -----------  ----------  --------  ----------------
Gi1/0/24   0.2       4            52.7        Class 4   ON     

and

#show cable-diagnostics interface gigabitEthernet  1/0/24
Port             Pair      Status      Length         Error          
Gi1/0/24    Pair-A    Open         ---           28 (+/- 2m)    
                  Pair-B    Open        ---            30 (+/- 2m)    
                  Pair-C    Open        ---            28 (+/- 2m)    
                  Pair-D    Open        ---            29 (+/- 2m)    

But the cable is fine -

I tried multible cables, and I checked PoE using an different AP (EAP115) which worked fine using PoE as well.
Using the included PoE Adapter works fine as well.

So I'd like to know if there is anything else I can try to get the AP working as it should, as specifications say, that it has to work with the switch.

Greetings and Thanks

Rabb1t