Home

Forums

Stories

Knowledge Base

Business Community > WiFi > Missing label (with SSID info) printed at the bottom of the product

< WiFi

Missing label (with SSID info) printed at the bottom of the product

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Missing label (with SSID info) printed at the bottom of the product

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

JeanV

2024-06-20 20:58:40 - last edited 2024-06-21 03:56:01

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-06-19

Missing label (with SSID info) printed at the bottom of the product

2024-06-20 20:58:40 - last edited 2024-06-21 03:56:01

Model: EAP110-Outdoor

Hardware Version:

Firmware Version:

If missing, what to do when you have to enter the required Device Key or Mc information?

File:

IMG_20240620_225143.jpgDownload

1 Accepted Solution

Hank21

2024-06-21 03:55:48 - last edited 2024-06-21 03:56:01

Posts: 3673

Helpful: 719

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:Missing label (with SSID info) printed at the bottom of the product-Solution

2024-06-21 03:55:48 - last edited 2024-06-21 03:56:01

@JeanV
The device label can be found on the device itself. Because this is an outdoor device, the label has been placed beneath the cover. To get it, remove the unit's small cover. In addition, the Device Key is not required during the setup process. The Device Key is used to set up the controller, not this unit.

We have an article that introduces how to use the Omada app to set it up. Please read it.
How to configure basic wireless settings of my TP-Link EAP in Standalone mode?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Recommended Solution

JeanV

LV1

2024-06-21 08:36:01

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-06-19

Re:Missing label (with SSID info) printed at the bottom of the product

2024-06-21 08:36:01

@Hank21

Many thanks for your prompt reply.

I now have located the MAC information inside the cover of the EAP110 device. It indicates: A8-42-A1-F1-53-82.

On the Omada application, when I try to enter this code, it shows as A842-A1F1-5382- and the app indicates "Key format of the device not valid" (stated in french as Format de clé de périphèrique non valide)

Please see attachment.

Could you please explain how to proceed?

File:

JeanV EAP110.pdfDownload

Hank21

2024-06-21 09:54:36

Posts: 3673

Helpful: 719

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:Missing label (with SSID info) printed at the bottom of the product

2024-06-21 09:54:36

@JeanV

There is no need to enter the device key. The Mac address is not the device key.You can skip that step and follow the instructions to set up it. Remember to switch to the standalone APs, which are located in the top right corner of the Omada app.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Missing label (with SSID info) printed at the bottom of the product

Missing label (with SSID info) printed at the bottom of the product

Information

Voters 0

Tags