Business Community > WiFi > Missing label (with SSID info) printed at the bottom of the product
< WiFi

Missing label (with SSID info) printed at the bottom of the product

Missing label (with SSID info) printed at the bottom of the product

Missing label (with SSID info) printed at the bottom of the product
Missing label (with SSID info) printed at the bottom of the product
a week ago - last edited Friday
Model: EAP110-Outdoor  
Hardware Version:
Firmware Version:

If missing, what to do when you have to enter the required Device Key or Mc information?

File:
IMG_20240620_225143.jpgDownload
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Missing label (with SSID info) printed at the bottom of the product-Solution
Friday - last edited Friday

  @JeanV 
The device label can be found on the device itself. Because this is an outdoor device, the label has been placed beneath the cover. To get it, remove the unit's small cover. In addition, the Device Key is not required during the setup process. The Device Key is used to set up the controller, not this unit.

We have an article that introduces how to use the Omada app to set it up. Please read it.
How to configure basic wireless settings of my TP-Link EAP in Standalone mode?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Missing label (with SSID info) printed at the bottom of the product-Solution
Friday - last edited Friday

  @JeanV 
The device label can be found on the device itself. Because this is an outdoor device, the label has been placed beneath the cover. To get it, remove the unit's small cover. In addition, the Device Key is not required during the setup process. The Device Key is used to set up the controller, not this unit.

We have an article that introduces how to use the Omada app to set it up. Please read it.
How to configure basic wireless settings of my TP-Link EAP in Standalone mode?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
Re:Missing label (with SSID info) printed at the bottom of the product
Friday

  @Hank21 

Many thanks for your prompt reply.

I now have located the MAC information inside the cover of the EAP110 device. It indicates: A8-42-A1-F1-53-82.

On the Omada application, when I try to enter this code, it shows as A842-A1F1-5382- and the app indicates "Key format of the device not valid" (stated in french as Format de clé de périphèrique non valide) 

Please see attachment.

Could you please explain how to proceed?

 

 

File:
JeanV EAP110.pdfDownload
  0  
  0  
#3
Options
Re:Missing label (with SSID info) printed at the bottom of the product
Friday

  @JeanV 

There is no need to enter the device key. The Mac address is not the device key.You can skip that step and follow the instructions to set up it. Remember to switch to the standalone APs, which are located in the top right corner of the Omada app.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 74

Replies: 3

Related Articles
Change SSID via SSH
192 0
Clone ssid from home Wi-Fi to eap110-outdoor
1160 0
Missing Vouchers in EAP110 Outdoor
894 0
Label for ports
813 1
Can not connect SSID on EAP-110 outdoor
670 1
TL-R605 v1.0 missing gateway and internet info
551 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.