Adding additional APs to EAP610 V2 environment

Adding additional APs to EAP610 V2 environment

Adding additional APs to EAP610 V2 environment
Adding additional APs to EAP610 V2 environment
2024-06-23 17:34:22 - last edited 2024-06-24 03:11:32
Model: EAP610   EAP245  
Hardware Version: V2
Firmware Version:

I have 2 x EAP245 and 1 x EAP610 V2.0 on my network.

 

I am looking to replace the EAP245 APs with 2 x EAP610 or EAP613 so I can upgrade my whole wireless network to WiFi 6

 

However, I see mixed information about the difference between the EAP610 / EAP613 APs. The key difference appears to be the lack of a power cord with the EAP613 (which is fine as I use PoE) but I have seen another post showing a few different things -  What is the difference between EAP613 and EAP610 (indoor ceiling mount ver)

 

This post shows the following:

  • Stats on OC200 are different (more detailed stats provided with EAP 610)
  • EAP613 can support 250+ concurrent clients but there is no number provided for the EAP610 - as shown Compare Product: EAP610 vs EAP613 (1-pack)

 

Is there a different chipset used on these units?

 

@Fae any chance you can weigh in here as an authoritative source from TP-Link?

 

Thanks!

  0      
  0      
#1
Options
1 Accepted Solution
Re:Adding additional APs to EAP610 V2 environment-Solution
2024-06-23 23:50:07 - last edited 2024-06-24 03:11:32

 Hi @kasa_user 

 

EAP613 is the same thing as EAP610 v3, just removed the power cord. 

kasa_user wrote

 

@Fae any chance you can weigh in here as an authoritative source from TP-Link?

 

Thanks!

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Adding additional APs to EAP610 V2 environment-Solution
2024-06-23 23:50:07 - last edited 2024-06-24 03:11:32

 Hi @kasa_user 

 

EAP613 is the same thing as EAP610 v3, just removed the power cord. 

kasa_user wrote

 

@Fae any chance you can weigh in here as an authoritative source from TP-Link?

 

Thanks!

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
Re:Adding additional APs to EAP610 V2 environment
2024-06-24 15:08:03

Thanks @Fae! Quick follow up...

 

Why are the stats on the Omada app on the OC200 different for the EAP610 vs EAP613?

 

 

  0  
  0  
#3
Options
Re:Adding additional APs to EAP610 V2 environment
2024-06-24 23:49:27

Hi  @kasa_user 

 

That is actually the difference between EAP610 V1/2 and EAP610 V3. 

 

V3 solved some heat issues and provide a smaller size. 

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options