Bugs and missing items in relation to the OC software - OC200 with 5.14.26.23
Bugs and missing items in relation to the OC software - OC200 with 5.14.26.23
Update: 29/07/2024.
I am noticing some differences and problems in relation to the Omada Controller software.
[ Problems ]
1- Within the organization, I noticed that the items we add to the Dashboard are not actually saved. I thought I was doing something wrong, but when I left and came back I realized this. *** RESOLVED
2- The DNS Proxy feature seems to be working very poorly. *** RESOLVED
Before the update, the feature switched between DNS Proxies with the best effectiveness. Now, it seems that there is a huge delay when switching between Cloudflare and Google.
I can clearly feel the change at times. Especially in games. This did not happen before. I had to disable it.
R: Unfortunately the problem was located in my operator and caused me a false/positive. I appreciate everyone's attention.
[ Missing Items - RESOLVED ]
1- Within the Organization, in Reports, I noticed that there was previously an indication of the most accessed sites and applications. This was very useful to me and is not appearing there.
SOLUTION:
I need you to validate these problems, please.
Thank you all.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
After upgrading my OC200 to 5.14.26.23
My LAN speed has decreased from 1gbps to ~300/Mbps on all speedtests.
However i'm getting 400-500Mbps on WIFI wich is also lower then on previous firmware, but more than on LAN.
My cable is 100% 1gbps and on LAN i had speed near 960Mbps before update.
On LAN:
❯ speedtest -m
speedtest-go v1.7.7 (git-dev) @showwin
✓ ISP: 79.191.92.94 (Orange Swiatlowod) [52.2304, 21.0248]
✓ Found 21 Public Servers
✓ Test Server: [30440] 1.14km Warsaw (Poland) by Exatel S.A
✓ Latency: 3.750704ms Jitter: 448.204µs Min: 2.924125ms Max: 4.5635ms
✓ Packet Loss Analyzer: Running in background (<= 30 Secs)
✓ Download: 313.44 Mbps (Used: 396.96MB) (Latency: 5ms Jitter: 0ms Min: 4ms Max: 5ms)
✓ Upload: 293.75 Mbps (Used: 381.43MB) (Latency: 19ms Jitter: 0ms Min: 18ms Max: 21ms)
✓ Packet Loss: 0.00% (Sent: 268/Dup: 0/Max: 267)
On Wifi
❯ speedtest -m
speedtest-go v1.7.7 (git-dev) @showwin
✓ ISP: 79.191.92.94 (Orange Swiatlowod) [52.2304, 21.0248]
✓ Found 21 Public Servers
✓ Test Server: [30440] 1.14km Warsaw (Poland) by Exatel S.A
✓ Latency: 6.530562ms Jitter: 391.159µs Min: 5.706125ms Max: 7.122292ms
✓ Packet Loss Analyzer: Running in background (<= 30 Secs)
✓ Download: 651.49 Mbps (Used: 819.67MB) (Latency: 44ms Jitter: 72ms Min: 5ms Max: 259ms)
✓ Upload: 284.33 Mbps (Used: 373.51MB) (Latency: 85ms Jitter: 102ms Min: 7ms Max: 328ms)
✓ Packet Loss: 2.23% (Sent: 350/Dup: 0/Max: 357)
- Copy Link
- Report Inappropriate Content
I suggest you back up your settings and reset the device.
I started the controller with the backup settings from the software I had on my PC. And since then, the download and upload rates have been working correctly. And the speedtest tests are also normal.
- Copy Link
- Report Inappropriate Content
@Artur.Aragao Do You mean reset OC200 and restore it from backup after restart? I thought of rolling back to previous version, since still have a backup from it. But on latest one, UI is so responsive on oc200 :)
- Copy Link
- Report Inappropriate Content
It didn't help.
My router is ER605 is still giving only 300Mb/s instead of 1Gb.
What the hell?
I've tryied OC200 factory reset.
Roll back to 2.14.21, and no result.
Locked on 300Mb now??
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1148
Replies: 15
Voters 1