@HeyYoVio 

Hi, please share a screenshot of the Device Page of the controller so we can know what Festa devices you are using.

What kind of wired clients are connecting to the network?  Did you try unplug them and re-plug?

  @Vincent-TP 

Currently, the FR205 is the only Festa device I am using - this is sort of a test run prior to migrating my other network components to Festa. Here's the screenshot you requested:

Re: wired devices connected to the router, there are two Windows desktops (one on Windows 10, one on Windows 11), a Chromecast Ultra that is connected through an ethernet adapter, and a UBNT AP Pro. I had other devices connected through an unmanaged switch, but I opted to remove that and connect one of the desktops directly just to rule out that being an issue. All of these devices are directly connected to the LAN ports on the FR205 and getting an IP address through DHCP, they just do not show as connected clients.

I have done the following things already:

• Disconnected and reconnected all clients from the LAN ports on the router
• Reboot the router
• Power cycle the router
• Update router firmware to the current version
• Assigned IP information manually on desktops to see if they would then show in the client list

Any further help or insight into how to correct this would be appreciated.

  @HeyYoVio I had the same issue, had to add a Festa switch to be able to see all the wired devices. The image shows how it looks after adding the switch. I have a TL-SG1024DE as a main switch and bought a Festa FS310GP, where I have the APs and the main switch connected. 

This is my topology (cant see the SG1024DE here)

I'm curious how something this glaring got past product testing. Especially since these are geared towards home offices / small businesses.

  @HeyYoVio the screen shot you included is for the DEVICES list, not the clients list. What shows on your clients list in the FESTA dashboard?

  @HeyYoVio Same here

I only bought that router, nothing else from Festa. I can’t see the list of connected clients or all the information on the dashboard in the Festa cloud. The device is detected perfectly, but it’s incomprehensible why I can’t see all the information.

I can not believe it

please if you have a solution at any time, tag me

  @Vincent-TP - thank you so much for the clarity here on the answer; it's greatly appreciated!  It's good to know that displaying wired clients directly connected to the Router is not supported currently, but that it's on your roadmap.

Is there anything you can share about where this lies on your roadmap?  Is this coming relatively soon, or is it far down on the list?