1. custom IP address/URL for the authentication portal. WiFi kiosks at malls, resorts, airports and hotels usually use short IP address for their authentication portal like [20.0.0.1 or 10.0.0.1] their portal shows the user all sorts of useful information like checking for internet connection before they can pay, duration of their usage, time remaining or traffic used and add time. currently, you need to type the Omada Hardware Controller’s IP address and port number in the URL bar if somehow the automatic portal redirection didn’t show up which happens quite often. Example. (192.168.16.62:8088/portal/entry?….) this is a lot of characters to type. this could be tedious to type out when they have to do it often.
    

2. time remaining counter on the authentication portal. If users see they’re running out of time they’ll get to decide to end or save what they’re doing to avoid unexpected disconnection/interruption or purchase additional time.
    

3. ability to add time using new voucher. right now with omada portal, you need to wait for your time to run out and disconnecting you to internet before you can even access the portal and put in your new voucher. you can’t really open the portal after you authenticated your device. The WiFi kiosks I mention earlier, can open the authentication portal even if your time hasn’t ran out. Their portal tells the user a lot of useful information like time remaining and internet connectivity status.

this is just what I only needed in my case, I’m sure some users need different requirements.