Business Community > Requests & Suggestions > EAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?
< Requests & Suggestions
 
5
Votes

Under Consideration EAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?

 
5
Votes

Under Consideration EAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?

Under ConsiderationEAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?
EAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?
2024-08-26 15:47:11 - last edited 2024-08-28 16:10:55

For the EAP783, on a 6Ghz network, the WPA-Mode encryption selection for WPA3-Enterprise encryption gives a choice between WPA3-Enterprise Enterprise only GCM-256 or WPA3-Enterprise Suite-B 192-bit CNSA encryption. This is good.

 

However on the 2.4GHz & 5GHz bands, and when any other band is simultaneously selected with the 6GHz band, the only WPA3-Enterprise option available is WPA3-Enterprise "AES" which is actually the much weaker WPA3-Enterprise Transition mode CCM-128 (CCMP) even with PMF set correctly. I've tested this.

 

Could WPA3-Enterprise only GCM & CNSA modes please be enabled for the other bands on the EAP783? The EAP783 is clearly capable of supporting the better encryption already. Thank you.
 

 

#1
Options
1 Accepted Solution
Re:EAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?-Solution
2024-08-28 01:57:09 - last edited 2024-08-29 00:47:32

  @tk1kt 

Good news arrives. We intend to include this feature in the firmware that adapts our V5.15 controller, though estimated release date is unknown.Please pay attention to our official website.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
#4
Options
5 Reply
Re:EAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?
2024-08-27 09:23:19 - last edited 2024-08-27 09:23:38

  @tk1kt 

Thank you for your feedback and post. We have forwarded your request to our developer team for evaluation.

Please note that all requests undergo a thorough evaluation by our developer team before being added to the roadmap. This process may take some time, so please be patient if you don't see immediate results. Features with lower priority or fewer user reports might experience delays in implementation as we gather more feedback and compare it with competitor products.

It is important to understand that submitting a request does not guarantee its implementation; only requests that pass the evaluation will be considered for inclusion in future updates.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
#2
Options
Re:EAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?
2024-08-27 15:43:31

  @Hank21 

 

Thanks, Hank!

#3
Options
Re:EAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?-Solution
2024-08-28 01:57:09 - last edited 2024-08-29 00:47:32

  @tk1kt 

Good news arrives. We intend to include this feature in the firmware that adapts our V5.15 controller, though estimated release date is unknown.Please pay attention to our official website.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
#4
Options
Re:EAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?
2024-08-28 16:10:25

  @Hank21 

 

Brilliant Hank, thank you! I assume you meant 5.15, not 5.5?

#5
Options
Re:EAP783 and WPA3-Enterprise GCM/CNSA on 2.4/5Ghz bands?
2024-08-29 00:49:05

  @tk1kt 

Yes, that is a typing error.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
#6
Options

Information

Helpful: 5

Views: 325

Replies: 5

Voters 0

No one has voted for it yet.

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.