CP710 Wireless Signal Quality
Hello Guys,
I have two CPE 710 devices configured as an access point and client. The issue is that I cannot see the wireless signal quality on the AP device but can on the client device.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @WooJoo
The speedtest result you got here is the download speed between the wireless bridge. It's different from the RX rate.
To improve the speed, please have a look at the following guidance:
Long distance wireless connection concerns when using outdoor access point
If the performance is not good, Please refer to the following articles to do some troubleshooting:
How to build a Wireless Network between home and farm using tp-link products
How to troubleshoot the CPE in AP and Client mode when the wireless speed is slow
- Copy Link
- Report Inappropriate Content
Hi @WooJoo
What's the encryption mode you configured?
Actually, the TX rate is 886mbps, which is already the highest the device supports. No need to worry about the wireless signal.
- Copy Link
- Report Inappropriate Content
I'm using the WPA2 with AES. Max Support speed was 800 Mbps but the speed between the AP & Client is max 250 Mpbs.
- Copy Link
- Report Inappropriate Content
Hi @WooJoo
The speedtest result you got here is the download speed between the wireless bridge. It's different from the RX rate.
To improve the speed, please have a look at the following guidance:
Long distance wireless connection concerns when using outdoor access point
If the performance is not good, Please refer to the following articles to do some troubleshooting:
How to build a Wireless Network between home and farm using tp-link products
How to troubleshoot the CPE in AP and Client mode when the wireless speed is slow
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 208
Replies: 3
Voters 0
No one has voted for it yet.