block access to wifi clients remote site
I have 2 networks 1 local and 1 remote all device models versions and firmware listed in the tables below.
My question is on my local site I have the option to block a wifi clients (red circle with strike through)
On my remote site there is no such option as you can see from the screenshots I need this option in my remote site how do i do?
remote site
local site
Remote site |
||
Omada cloud controller |
Version 1.0.3 |
|
|
|
|
Device |
Model |
Firmware |
|
|
|
ER605 Omada Gateway |
ER605 v2.0 |
2.2.6 Build 20240718 Rel.82712 |
|
|
|
EAP245 (AC1750) |
EAP245(US) v3.0 |
5.0.7 Build 20220611 Rel. 55043 |
Home site On-Premises Standard |
||
Omada OC200 controller |
Version 1.0.3 |
|
|
|
|
Device |
Model |
Firmware |
|
|
|
Omada OC200 controller |
OC200 1.0 |
1.31.3 Build 20240620 Rel.80383 |
Controller version |
5.14.26.23 |
|
|
|
|
ER605 Omada Gateway |
ER605 v2.0 |
2.2.6 Build 20240718 Rel.82712 |
|
|
|
EAP110 |
EAP110(EU) v4.0 |
5.0.4 Build 20220216 Rel. 57495 |
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
there is no problem with connecting the OC200 directly to the router. The router does not have POE ports, so the OC200 must be powered by a USB or POE adapter.
- Copy Link
- Report Inappropriate Content
Hi I wonder if you can help me on the wifi clients page on the controller i blocked 1 client due to abuse of system,
i now want to unblock them again where do i find that in the controller? I know the MAC address of the client in question...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@MR.S Hi found it thank you very much for your help.
Do i need to enable "history data retention" in the controller settings to keep this data,
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@MR.S Hi thanks for that, with regard to the storage space warning that using these settings will use I have a 32 gb usb stick plugged into the controller , i have set auto backup routine, will the above data be stored there as well?
- Copy Link
- Report Inappropriate Content
yes but not for long, from 5.14.3x.xx it will only be possible to backup settings. client data and client name you have set on your client is not backed up, it makes me a little irritated because all this work has to be done again if you have to restore. I have many IoT devices that I have named, among other things.
- Copy Link
- Report Inappropriate Content
So with your help i now have the network isp-1 in remote location (my restaurant) all is working well and i can control all the functions i need for now.
I have a second network as per diagram isp-2 which i have different use for i was wondering what the best way to control that network is as well with all the functions avaialble from OC200 i dont suppose there is anyway to connect directly via a switch perhaps
Or do i just install another oc200 on site?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 668
Replies: 22
Voters 0
No one has voted for it yet.