This Article Applies to:

 

All TP-Link EAPs

 

 

• For APs that support both 24V Passive PoE and standard PoE

Alternative Mode A is supported for standard PoE and Alternative Mode B is for 24V Passive PoE

 

• For APs that support both 48V passive PoE and standard PoE

Alternatives Mode A and Mode B are supported for standard PoE, and Alternative Mode B is for 48V passive PoE

 

• For APs that only support 24V passive PoE

Alternative Mode B is the power supply mode

 

• For APs that only support standard PoE

Both Alternative Mode A and Mode B are supported

 

Click the link below to have a better understanding of the power supply mode (point 4).

Why my PoE powered device cannot work properly when connected to the PoE Switch

 

 

 

Feedback:

 

• If this was helpful, welcome to give us Kudos by clicking the upward triangle below.
• If there is anything unclear in this solution post, please feel free to comment below.

 

Thank you in advance for your valuable feedback!

 

------------------------------------------------------------------------------------------------

Have other off-topic issues to report? 

Welcome to > Start a New Thread < and elaborate on the issue for assistance.