SG2210MP v4.20 update issue
SG2210MP v4.20 update issue
Tags:
#Firmware Update
Omada controller 5.15.6.7 cannot update SG2210MP v4.20 firmware from 4.20.4 Build 20241104 Rel.40492 to 4.20.5.
The Сontroller suggests installing a new firmware version 4.20.5 for my SG2210MP v4.20. I click update firmware, the controller says that the update process is underway ("Upgrading"), but nothing happens. After about 5-7 minutes, the switch has the status "Connected", but with the old firmware and offers an update again. Communication with the switch is not interrupted during the upgrade (ping not lost).
1 Accepted Solution
Re:SG2210MP v4.20 update issue-Solution
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.
Re:SG2210MP v4.20 update issue-Solution
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.